Yard got a New Mx3 GS today

Do you have an MX-3 related item for sale? Post a quick note here.
Post Reply
RiEnHaRp
Regular Member
Posts: 50
Joined: June 3rd, 2001, 2:01 am

Yard got a New Mx3 GS today

Post by RiEnHaRp »

The Salvage yard got a 92 Mx-3 Gs with 158,000 today!!!! Its the first one I have gotten to put my hands on, Its black and clean interior, the parts it has are the 15in wheels, all body panels and parts except, Rear Spoiler, Front Spoiler, Drivers headlight and Drivers fender. All other parts are on it! Its been repainted because its covered in dry spray, very grainy, the front end parts are off a Raspberry Mx-3, and it has a power sunroof. The engine is complete, same with the tranny. It has a 5sp, still has battery in it, so if Im there next time I'll try to find a key and start it and see how it runs. I havent checked to see if it had the rear tie bar or anysuspension parts like that. The car is practically bone stock. Only parts that caught my eye are the deluxe Armrest not broken, front floor mats, and the 15 in wheels, and rear disc setup. It does have rear wiper and the switch is on the wiper switch itself, probably only fits 92-93 unless you are good at wiring up that kinda stuff, Just thought Id share the find. P.S. no rear mudflaps either. And Manual WIndows.<p>[ July 31, 2002: Message edited by: Custommx3 ]
Smokin mx-3
Regular Member
Posts: 315
Joined: September 26th, 2001, 2:01 am
Location: Guelph

Re: Yard got a New Mx3 GS today

Post by Smokin mx-3 »

where are you located
RiEnHaRp
Regular Member
Posts: 50
Joined: June 3rd, 2001, 2:01 am

Re: Yard got a New Mx3 GS today

Post by RiEnHaRp »

Im located in Tulsa, Oklahoma, but the car is in Owasso, just North of T town. <P> CustomMX, what did ya edit on my post?? Just wondering
mazda20
Regular Member
Posts: 550
Joined: November 4th, 2001, 2:01 am
Location: San Antonio, Tx
Contact:

Re: Yard got a New Mx3 GS today

Post by mazda20 »

Are you planning on doing the rear end swap to disk brakes? If not I have been trying to find a donor car.
94 Mazda MX-3 BPT Custom Intake/Exhaust T3/T4, 51mm BOV, Tial WG, 2.5" Piping, 880cc Inj, Godspeed Intercooler, TEC II
My MX-3 Website
RiEnHaRp
Regular Member
Posts: 50
Joined: June 3rd, 2001, 2:01 am

Re: Yard got a New Mx3 GS today

Post by RiEnHaRp »

Probably not, Im just trying to sale mine at the moment. Just excited to say Ive sat in a GS before! Its at a Pull-a-part style yard so you could probably get the parts cheap! THe last time (about 2 years ago) I checked prices I was quoted $175-200. I have been going here for at least 3 years and have a good repore with the guy so I bet he would sale them for maybe $55-60 a hub.
DarrenMcD
Junior Member
Posts: 14
Joined: June 13th, 2001, 2:01 am
Location: dallas,ga, usa

Re: Yard got a New Mx3 GS today

Post by DarrenMcD »

Looking for a few things.<P>1. EGR Valve<BR>2. Deluxe Arm Rest.<P>If you could email me at darrenmcd@yahoo.com<P>Thanks<BR>Darren
Mehran
Regular Member
Posts: 31
Joined: June 19th, 2002, 2:01 am
Location: Vancouver, BC

Re: Yard got a New Mx3 GS today

Post by Mehran »

Looking for a Cargo Cover?...any? thx..MN :D
RiEnHaRp
Regular Member
Posts: 50
Joined: June 3rd, 2001, 2:01 am

Re: Yard got a New Mx3 GS today

Post by RiEnHaRp »

Yes it does have the armrest and its not broken, But for the Cargo Cover, its cracked. I dont know about the EGR valve, the car is complete, it hasnt been broke down or anything. *** JUst To clarify, THIS Isnt My Car, Its one the Salvage yard just got in***
User avatar
Casino
Regular Member
Posts: 779
Joined: April 20th, 2002, 2:01 am
Location: Sudbury Ontario Canada / windsor

Re: Yard got a New Mx3 GS today

Post by Casino »

want to sell those 15" wheels ?
http://www.realtimeperformance.ca

03 miata, formally bottle fed 96 DOHC
Post Reply

Return to “MX-3 Related Items For Sale/Trade”