shift points please help
shift points please help
right now im shifting at about 3.5-4 rpms when im just driving and 4.5 when im racing does that sound right? i have a 93 sohc 4 cyl. and when im on the highway i stop gasing it at like 4.5 cuz im not sure if its safe to go any higher than 4.5 in 5th gear.
- mr1in6billion
- Supporting Member
- Posts: 961
- Joined: August 28th, 2005, 9:06 pm
- Location: Fog City
I shift pretty low. generally at around 3.5k, sometimes 3k in 2nd gear, maybe 4k if i'm in a rush or on a hill. I don't really race so I wouldn't know the optimum shift points, but you might as well take it to redline, tho I've always been scared of high revs in first, so i'd probly get out of first before 5k at the latest.
. As long as your not going too low as to stall your car, or so high it redlines, your fine.
(just noticed)
How fast is 4.5 in 5th gear? Isn't that over 100mph? I don't drive much highway (or pay much attention to my speed/rpms). But the last time I was going 115, my tachometer was the last thing on my mind.
. As long as your not going too low as to stall your car, or so high it redlines, your fine.
(just noticed)
How fast is 4.5 in 5th gear? Isn't that over 100mph? I don't drive much highway (or pay much attention to my speed/rpms). But the last time I was going 115, my tachometer was the last thing on my mind.
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
u can go all the way to 6 and half on the tach it won't go any more due to a rev limiter no way to get rid of it there to keep ur motor safe. i when i had a sohc in stock form top speed was 105 mph. Add the basics intake exhaust beather filter 120mph but it take forever on level road.
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
-
- Regular Member
- Posts: 535
- Joined: December 11th, 2003, 2:01 am
- Location: Middletown PA
I've had my MX for 2 years and for 2 years I drive 80% of the time shifting at ATLEAST 6k. Have had not a single problem with the actual engine (185,000 miles on it now)
http://www.cardomain.com/ride/2385931/4
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
Duh
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
- mr1in6billion
- Supporting Member
- Posts: 961
- Joined: August 28th, 2005, 9:06 pm
- Location: Fog City
-
- Regular Member
- Posts: 535
- Joined: December 11th, 2003, 2:01 am
- Location: Middletown PA
Well now, everything eats gas like crazy since the car is basically on it's last leg, but when I bought it 120k on the ODOM and drove it like that I was still getting 26-28MPG City driving, you arnt going to hurt the car though, Mazda's love the Revs!
http://www.cardomain.com/ride/2385931/4
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
- happyclown
- Regular Member
- Posts: 316
- Joined: July 18th, 2004, 2:01 am
- Location: Vermont
- Contact:
when i first got my mx I would shift at 3 all the time, and when racing would rarely take it over 4.5. Now that i've had it for some time I go all over the place with my shifts. Once while playin around racin a friend I decided I'd take it all the way to the rev limiter before i shift, and it seemed like i lost power just before i hit it, so now i shift just before 6 when im gettin on it. For normal drivin it depends on how much gas i have, if i take it easy 2.5 is a good place to shift otherwise 3-4.
1993 RS Teal
- ryanlindenberg
- Regular Member
- Posts: 874
- Joined: February 24th, 2003, 2:01 am
- Location: Minnesota
yea the power band drops off before the rev limiter hits...maximum horsepower is produced between 5.5k and 6k i think. so slightly past that would be the best place to shift if you were racing.
i shift my BPT between 3-3.5k normal driving and 5.5-6k when having fun. i don't look at my RPM guage much anymore, just go by the sound of the engine.
i shift my BPT between 3-3.5k normal driving and 5.5-6k when having fun. i don't look at my RPM guage much anymore, just go by the sound of the engine.
CARDOMAIN WITH UPDATED PICS
"There are 2 kinds of pedestrians, the quick and the dead."
"There are 2 kinds of pedestrians, the quick and the dead."