Tokiko Struts

This forum is for Discussion on Suspension issues.
Post Reply
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Tokiko Struts

Post by solo_ryder »

Hey, how good are the blue tockico HP's? I want to know what other ppl think about them, I ahve them and I am not sure how good they are since I have never had performance struts before, they seem to be tough.
User avatar
hppwdn
Regular Member
Posts: 925
Joined: May 27th, 2005, 10:50 pm
Location: West Palm Beach, FL
Contact:

Post by hppwdn »

I have them on mine and about 4 or 5 of my buddies have them on their cars too. We all love em.
92 MX3 Turbo ($100 junkyard KLG4) 11.904 @ 124.3mph, 14psi, DOT approved Hoosier drags, pump gas.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
Mazdaracer
Regular Member
Posts: 248
Joined: September 24th, 2003, 2:01 am
Location: Corona, CA
Contact:

Post by Mazdaracer »

They are decent, but i found the ZX2 S/R struts to have better valving and matched much better to the H&R springs.

The thing with the Blues, is that they are designed with the stock spring, they only offer about 10% increased stiffness over stock. That does not give much room at all for higher spring rates.

The S/R struts are designed around the matching ZX2 eibach springs. Have a shrter stroke to accomidate the lower length and have much more agressive valving. The ZX2 spring rates are 177-297# F - 114.2-182# R. The Blues would not be able to handle 297# springs...
THINK FAST, GO RACING!!
2004 Mazda6 Wagon
2004 Mazda3 Sedan
1990 BG8P Protege LX - KLZE - Race Preped - #98 SM - SCCA Solo2
Image
merlino
Regular Member
Posts: 66
Joined: December 24th, 2005, 1:24 pm
Location: France
Contact:

Post by merlino »

Is it possible to drop 2 inches without any risk ? I mean with the Tokico or the ZX2 ... no damage on a broken ground ? I'd like to add 15 " wheels, and I don't know if I must begin with the wheels or the drop.
Mazdaracer
Regular Member
Posts: 248
Joined: September 24th, 2003, 2:01 am
Location: Corona, CA
Contact:

Post by Mazdaracer »

the ZX2's have a shorter shaft stroke for a 1.2" drop. A 2" drop will be *ok* but will tend to wear the strut out faster.

the Blues do not have a shoter stroke and would tend to wear out even faster with a 2" drop.

15" should be fine, but you may want to think about 16".
THINK FAST, GO RACING!!
2004 Mazda6 Wagon
2004 Mazda3 Sedan
1990 BG8P Protege LX - KLZE - Race Preped - #98 SM - SCCA Solo2
Image
merlino
Regular Member
Posts: 66
Joined: December 24th, 2005, 1:24 pm
Location: France
Contact:

Post by merlino »

Thank you. Yes I'd like better 16" but I fear my acceleration speed will be poor. My MX only have 107 hp ...
Mazdaracer
Regular Member
Posts: 248
Joined: September 24th, 2003, 2:01 am
Location: Corona, CA
Contact:

Post by Mazdaracer »

you can use this http://www.miata.net/garage/tirecalc.html to calculate the correct tire size.
THINK FAST, GO RACING!!
2004 Mazda6 Wagon
2004 Mazda3 Sedan
1990 BG8P Protege LX - KLZE - Race Preped - #98 SM - SCCA Solo2
Image
merlino
Regular Member
Posts: 66
Joined: December 24th, 2005, 1:24 pm
Location: France
Contact:

Post by merlino »

Very useful. According what I have read, 16" doesn't change so much if you take the good tires. But I'll have to control with the legal sizes in my country.
Post Reply

Return to “Suspension/Brakes/Wheels/Tires”