Rear Lower Tie Bar

Jovian2k · Post by **Jovian2k** » January 2nd, 2006, 11:56 pm

I have a 93 RS, so naturally I do not have a rear lower tie bar. I would like to get one and have two options:

Stock GS http://cgi.ebay.com/ebaymotors/MAZDA-MX ... dZViewItem

or SRD http://www.srdperformance.com/

The one on ebay is considerably cheaper, anyone replaced the stock one with an SRD? any difference? I'm sure the stock GS is better than nothing either way...

mitmaks · Post by **mitmaks** » January 3rd, 2006, 12:53 am

stock GS will work just fine. SRD just looks better you know. but there no difference, at least I didnt notice any.

Neil · Post by **Neil** » January 3rd, 2006, 2:51 am

Jovian2k wrote:I have a 93 RS, so naturally I do not have a rear lower tie bar. I would like to get one and have two options:

Stock GS http://cgi.ebay.com/ebaymotors/MAZDA-MX ... dZViewItem

or SRD http://www.srdperformance.com/

The one on ebay is considerably cheaper, anyone replaced the stock one with an SRD? any difference? I'm sure the stock GS is better than nothing either way...

Just go with the GS bar.

Mazdaracer · Post by **Mazdaracer** » January 4th, 2006, 1:24 pm

I make lower tie bars for the Protege, the front does not fit, but the rear does.

http://www.clubprotege.com/forum/showthread.php?t=19235

I plan to make front bars to fit the MX3 in the next few months as i plan to get an MX3 donnor car very soon

mitmaks · Post by **mitmaks** » January 4th, 2006, 11:26 pm

Mazdaracer wrote:I make lower tie bars for the Protege, the front does not fit, but the rear does.

http://www.clubprotege.com/forum/showthread.php?t=19235

I plan to make front bars to fit the MX3 in the next few months as i plan to get an MX3 donnor car very soon

front tie bar for mx3? that would be nice, what else you can make, any aftermarket sway bars etc?

93_mx3_gs · Post by **93_mx3_gs** » January 5th, 2006, 1:29 am

Hit up a junk yard and pay like 5.00 for a GS one and save yourself a lot of money. Get some new bushings though if your going to be under there anyways. XD

Mazdaracer · Post by **Mazdaracer** » January 5th, 2006, 11:53 am

mitmaks wrote:
Mazdaracer wrote:I make lower tie bars for the Protege, the front does not fit, but the rear does.

http://www.clubprotege.com/forum/showthread.php?t=19235

I plan to make front bars to fit the MX3 in the next few months as i plan to get an MX3 donnor car very soon
front tie bar for mx3? that would be nice, what else you can make, any aftermarket sway bars etc?

I have been making tie bars for the BG chassis for a few years now.

I am working on the front tie bar for the MX3, strut bars, rear control arms and a few other goodies. All but the rear strut bar should fit the MX3 (unless it's the same as the Protege, but i don't think so)

I haven't been able to find a place to help me make sway bars, but the Protege and MX3 sways are very different.

Post by **Custommx3** » January 5th, 2006, 12:36 pm

If you decide to sell them here, you MUST talk to Jeff about it 1st. email him @ ubb @ mx-3 . com

Mazdaracer · Post by **Mazdaracer** » January 5th, 2006, 3:48 pm

thanks, ya i know the drill when selling on forums.

Jovian2k · Post by **Jovian2k** » January 30th, 2006, 9:17 pm

what is the best way to do junk yard searches? I have no idea where any are near me in RI...

Neil · Post by **Neil** » January 30th, 2006, 10:24 pm

Jovian2k wrote:what is the best way to do junk yard searches? I have no idea where any are near me in RI...

Phone Book, or go find an Online Phonebook for your area and do a search on there. Thats about all i can think of.

Slammed6 · Post by **Slammed6** » February 1st, 2006, 12:28 am

you need a donor MX-3 lemme know, my friend just made a couple lower tie bars...very nice...powder coated black.

I'm in Ventura, CA

ccreech · Post by **ccreech** » February 1st, 2006, 9:42 am

I still have 4 GS rear tie bars in the big pile of stuff that has been in my garage for forever. $15 + shipping. I would like to start getting rid of this stuff so if anyone is still looking for anything on this list please PM me or respond in that thread.
http://www.mx-3.com/phpbb2/viewtopic.ph ... ght=crates
Jeff asked me if I was still doing this a few months back because the post had become burried. I WILL get rid of these parts in the next few months. If nobody here wants to buy them I am going to start posting it up on Ebay and jacking the prices up. They are taking up too much room in the garage and I am ready to be through with it. I would rather help out you guys, and mx-3.com, if at all possible. So take a look if you are interested.

Jeff, I haven't forgotten about you. We will settle up in the next few months.

jschrauwen · Post by **jschrauwen** » February 1st, 2006, 8:21 pm

Got Luc's rear lower tie bar but haven't installed it yet. Gotta get this lazy butt under the car again ...LOL

ovendenk · Post by **ovendenk** » February 2nd, 2006, 12:35 am

jschrauwen wrote:
Got Luc's rear lower tie bar but haven't installed it yet. Gotta get this lazy butt under the car again ...LOL

going in tomorrow more than likely.

catch up old man.

MX-3.com

Rear Lower Tie Bar

Rear Lower Tie Bar

Re: Rear Lower Tie Bar