HOLD light blinking, AIRBAG light blinking. What next?

mxprecidia · Post by **mxprecidia** » December 1st, 2005, 11:21 am

Ok so I have adjusted to deal with the hold light since the auto to manual swap. But now that I installed a new steering wheel the airbag light is annoying me. Any way to fix this without just taking the bulb out? Thanks.

Typhoonk · Post by **Typhoonk** » December 1st, 2005, 6:34 pm

might be dangerous -and it's illegal in the first place to remove a safety decive from a vehicle anyway (but it's just an off road car right?)

find out what the resistance is for the airbag, and put that amount of resistors in the plug and the ecu will think there is an airbag there.

Josh · Post by **Josh** » December 1st, 2005, 10:26 pm

or you can do what i did on my ATX to MTX swap. i took both bulbs out. so i take it your still running the ATX ECU and harness?

Focal · Post by **Focal** » December 1st, 2005, 10:44 pm

can some one please post the link to the online manual

atlantamx3 · Post by **atlantamx3** » December 2nd, 2005, 1:05 am

Focal · Post by **Focal** » December 2nd, 2005, 1:30 am

hahaha thanks alot atlanta

azazel95 · Post by **azazel95** » December 2nd, 2005, 3:23 am

atlantamx3 wrote:

I love SA's

reaper of souls · Post by **reaper of souls** » December 11th, 2005, 9:13 pm

don't worry remove the air bag you don't need it as long as you don't plan on selling it your ok cops can't say s--- but it needed to pass saftey i ripped out the two on my old escort you just have to put a peice of tape over the air bag light because it will keep on blinking