other than millenia, where can i get a ze throttle body?

ovendenk · Post by **ovendenk** » November 5th, 2005, 10:14 am

as the topic states. millenia's seem to be hard to come by. what other car can i look for that would have a kl47 or kl68 throttle body? thanks.

jschrauwen · Post by **jschrauwen** » November 5th, 2005, 10:33 am

Kevin, if this is in preparation for acquiring a ZE, you may be fortunate enough to get a ZE that already has a Millennia IM and TB. Look at the thread from millaj01 from last spring. He got a pristine ZE with all of the goodies. A fortunate find to say the least.
Probetalk is always a pretty good source for KL68 TB's.

ovendenk · Post by **ovendenk** » November 5th, 2005, 10:38 am

i already have a ze. i got a parts car with one minus the alt and tb. if your heading out to the yards can you look for me??? please.

i'll pay you for your efforts obviously.

babyblueMX3 · Post by **babyblueMX3** » November 5th, 2005, 11:31 am

the 2 engines you can get your TB from are the curve neck ze's and millenia.
srry man it'll be hard to find.

mxmaz · Post by **mxmaz** » November 5th, 2005, 12:29 pm

try car-part.com

babyblueMX3 · Post by **babyblueMX3** » November 5th, 2005, 12:33 pm

I just looked at car-parts.com and it seems there's one available here in Qc at Pintendre auto. I'll ask the mx-3ers around that area if they could go for little $

babyblueMX3 · Post by **babyblueMX3** » November 5th, 2005, 3:13 pm

ok I got a friend who's willing to go there monday
he'll hit me up with a price for it and I'll let you know !

mxmaz · Post by **mxmaz** » November 5th, 2005, 3:19 pm

Just phone them 1-800-463-5158

babyblueMX3 · Post by **babyblueMX3** » November 5th, 2005, 3:23 pm

they are closed right now and don't think they are opened tomorrow,
he's going there on monday anyways so he'll let me know

ovendenk · Post by **ovendenk** » November 6th, 2005, 10:27 am

this may be unrealistic, but i can really only afford like $100 for it max. money's tight and i still have to buy a lot of stuff before she gets installed. having to buy a $250 starter didn't help the bank account. let me know what happens at that yard. thanks

babyblueMX3 · Post by **babyblueMX3** » November 6th, 2005, 10:32 am

ohh I really doubt it'll be over 100$
we'll see on monday

ovendenk · Post by **ovendenk** » November 6th, 2005, 11:09 am

fingers are crossed...

babyblueMX3 · Post by **babyblueMX3** » November 7th, 2005, 4:59 pm

135 cad $ is the cheapest my guy could find out of 4 places
it is complete.
let me know if you want it

ovendenk · Post by **ovendenk** » November 7th, 2005, 9:19 pm

i do want it, but whether or not i can afford it depends on the answers i get from my other post. is this a rush thing? do you know how good of a seal the valve makes?

any ideas with my other problem would help too.
http://www.mx-3.com/phpbb2/viewtopic.ph ... highlight=

ikarus1 · Post by **ikarus1** » November 9th, 2005, 8:51 am

Find a pull-a-part junkyard with a Millenia and get one for $15.

I was fortunate, and bought a whole curve-neck intake on ebay for $75 with TB and injectors....at that price I guess I'll hang on to the TB

The pullapart yard here in Charlotte never has millenias but other locations have at least one. You can check here:
http://www.pullapart.com I am sure there are similar yards everywhere.

I get most if not all my OEM parts off of junkers. And with a 626 I needed alot of parts (they were mfg'd in USA...) and there are alot of 626s in Charlotte

Probes too

One day I am going to score a decent KLDE for ~ $120 I just can't wait.