MX3 Maniac's car
-
- Junior Member
- Posts: 9
- Joined: February 14th, 2004, 2:01 am
- Location: Quebec
MX3 Maniac's car
So this is my MX3 DAMN I love this car!!! I start to modify it lik 2 years ago and put some things in it... so tell me what you think of it....http://www.cardomain.com/ride/675827
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
Dont like all those gauges or the Neon lights but everything else seems nice
I'm just curious but do you know how much power you gained by porting the heads?
I'm just curious but do you know how much power you gained by porting the heads?
Last edited by Juans_93_MX3 on September 12th, 2005, 9:26 pm, edited 1 time in total.
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
- GregoryChristian
- Supporting Member
- Posts: 1413
- Joined: March 4th, 2003, 2:01 am
- Location: Gulf Coast
nice .... looks like a cockpit of an Airplane with all the interior gauges though ![Razz :P](./images/smilies/icon_razz.gif)
![Razz :P](./images/smilies/icon_razz.gif)
** My MX-3 ** http://www.cardomain.com/ride/360367
-
- Junior Member
- Posts: 9
- Joined: February 14th, 2004, 2:01 am
- Location: Quebec
Thanks guys and what do mean Juans_93_MX3 : dont like the neons ??? I dont have neons...... anyway.... I try to do my best the thing I love the most about my MX is my cockpit... Im very proud of it.. happy to see Im not the only one Who like to know whats going on under the hood before it broke.......its like an open window to see your engine
And no I dont know how much you gain with porting the heads... but I dont think it really worth the bill
![Very Happy :D](./images/smilies/icon_biggrin.gif)
And no I dont know how much you gain with porting the heads... but I dont think it really worth the bill
- neutral
- Supporting Member
- Posts: 1770
- Joined: December 27th, 2004, 10:19 am
- Location: U.S. Mid Atlantic
Sweet looking ride Julien. It's always great to see an MX-3 that gets so much TLC. Betcha get a little thrill on every night drive too, when all those gauge-faces light up - flaps up: check... landing gear down: check... runway#2 clear: check... MX3_Maniac, we have you on visual and you are cleared to tear some a-- up on the taxi into gate #1.
After all, it's probably not possible for a guy to have too many readouts of what's going on under the hood - it's a Zen thing.
When I saw the pic w/dark tint (nice) and chrome altezza's, it seemed that black altezzas would look interesting and be more consistent with the red/black them of the rest of the car. Matter of person pref tho.
![Image](http://memimage.cardomain.net/member_images/3/web/675000-675999/675827_16_full.jpg)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
When I saw the pic w/dark tint (nice) and chrome altezza's, it seemed that black altezzas would look interesting and be more consistent with the red/black them of the rest of the car. Matter of person pref tho.
![Image](http://memimage.cardomain.net/member_images/3/web/675000-675999/675827_16_full.jpg)
![Image](http://i116.photobucket.com/albums/o32/jimfyp/picnic4.jpg)
-
- Junior Member
- Posts: 9
- Joined: February 14th, 2004, 2:01 am
- Location: Quebec
-
- Regular Member
- Posts: 38
- Joined: August 17th, 2001, 2:01 am
- Location: Canada,Québec,Rdl
- Contact:
You can probably follow a Jet with this car.GregoryChristian wrote:nice .... looks like a cockpit of an Airplane with all the interior gauges though
Anyway Great mx-3 chumy....
![Wink :wink:](./images/smilies/icon_wink.gif)
_ ______________________________ _
MX-3 2.5 KL-ZE, kl-36 ECU, Millenia Intake, Outlaw Phenolic Spacer, Custom CAI, Catco 2 1/2 Hi-Flow Cat, Dual Megan Muffler, Mx3 Flywheel, Rear Strut Bar, Unorthodox UDP, Pacesetter Short Shifter, Cross Drilled Front Disk, Tokiko Blue Shock, H&R Coil, 17 inch white Motegie MR7 with Toyo Tire, Blue Metalic and Full Body Kit.......etc.....
14.61@97 MPH
MX-3 2.5 KL-ZE, kl-36 ECU, Millenia Intake, Outlaw Phenolic Spacer, Custom CAI, Catco 2 1/2 Hi-Flow Cat, Dual Megan Muffler, Mx3 Flywheel, Rear Strut Bar, Unorthodox UDP, Pacesetter Short Shifter, Cross Drilled Front Disk, Tokiko Blue Shock, H&R Coil, 17 inch white Motegie MR7 with Toyo Tire, Blue Metalic and Full Body Kit.......etc.....
14.61@97 MPH
- Josh
- Supporting Member
- Posts: 3432
- Joined: April 18th, 2002, 2:01 am
- Location: Washington state
- Contact:
Juans_93_MX3 wrote: I'm just curious but do you know how much power you gained by porting the heads?
on average for N/A applications its 8 to 15 WHP, and as much as 20 to 25 WHP on boosted applications
Josh
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
-
- Junior Member
- Posts: 9
- Joined: February 14th, 2004, 2:01 am
- Location: Quebec
What rims are thoose? the ones you have and my own is some of the nicest rims i have seen on MX'es
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
-
- Junior Member
- Posts: 9
- Joined: February 14th, 2004, 2:01 am
- Location: Quebec
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
Depending on how much the heads/intake get ported.Zoso124 wrote:HP can actually be lost on head porting jobs.
Stage 1 porting isnt worth doing on just a N/A engine.
Should still add power but just not worth it.
How much does it cost? $250 for port and polishing heads/intake?
I wonder how much Stage 2 porting would add to a turboed KLDE
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap