KLZE times? info?

A forum for Drag Strip/Track Racing Discussions. (NO Street Racing or Kill Stories, they WILL be deleted.)
User avatar
mx3tuner
Regular Member
Posts: 65
Joined: March 23rd, 2005, 5:17 pm
Contact:

KLZE times? info?

Post by mx3tuner »

hey, i was just wondering if anyone knew what the 1/4 mile times are for a KLZE with no mods to it. I have a 92 GS and i'm thinkin about doin a KLZE swap but i wanted to get some info about. Is it worth it?
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Post by babyblueMX3 »

if you got every components of the ze but with the rest stock...I would say high 14's
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
User avatar
mx3tuner
Regular Member
Posts: 65
Joined: March 23rd, 2005, 5:17 pm
Contact:

Post by mx3tuner »

also, i read that the KLZE was only ever eqipped with an auto tranny...is this correct? and can i use my stock 5-spd tranny on a KLZE or do i need a different tranny to make it be a manual?
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Post by babyblueMX3 »

ya stock tranny fits fine...and no klze came with mtx too
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
User avatar
mx3tuner
Regular Member
Posts: 65
Joined: March 23rd, 2005, 5:17 pm
Contact:

Post by mx3tuner »

ok kool, do you know any places to order a KLZE? and is it worth it? does it make a huge difference in driving?
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Post by babyblueMX3 »

man sorry to be the first to say this but you should try to search a little bit first...these questions has been answered tons of time before
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
User avatar
mx3tuner
Regular Member
Posts: 65
Joined: March 23rd, 2005, 5:17 pm
Contact:

Post by mx3tuner »

i've been researching and no one ever says if it is worth it or not...they just say how their swap expierience went and then nothing about it..but sorry man
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Post by babyblueMX3 »

I was saying that mainly because of your first question : where do buy a klze?

as for impressions..the car is definitly faster :p and much more fun to drive..throttle response is awsome..I don't know what to say more than it's a fun car to drive
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
User avatar
mxmaz
Regular Member
Posts: 1116
Joined: May 4th, 2004, 2:01 am
Location: Canada

Post by mxmaz »

Of course its worth it!! A decent driver can run mid 14's with just the engine, ze ecu, and the exhaust done. That makes you faster then stock 5.0 mustangs, rsx-s, and integra type r just to name a few.
mx3mike1
Regular Member
Posts: 68
Joined: August 26th, 2005, 12:02 am
Location: Brampton, Ontario
Contact:

klze

Post by mx3mike1 »

does anyone know a place in tdot to get a klze mt swap
1996 mx3 gs - so long
1997 Talon Tsi Awd - 350whp ya I wish
mx3mike1
Regular Member
Posts: 68
Joined: August 26th, 2005, 12:02 am
Location: Brampton, Ontario
Contact:

klze

Post by mx3mike1 »

i got a auto is it possible to switch it to manual and how much
1996 mx3 gs - so long
1997 Talon Tsi Awd - 350whp ya I wish
Slammed6
Regular Member
Posts: 965
Joined: January 14th, 2005, 5:34 am
Location: Oxnard, California

Post by Slammed6 »

I do KLZE swaps but it would probably help if everyone knew where you lived..lol.
***D-Tuned Custom KL MX-3 on Nitrous***
User avatar
Nd4SpdSe
Senior Member
Posts: 11212
Joined: May 25th, 2002, 2:01 am
Location: Québec City, Quebec, Canada
Contact:

Post by Nd4SpdSe »

I wish.
babyblueMX3 wrote:ya stock tranny fits fine...and no klze came with mtx too
What? What about the MX-6's or 626's I know they both have ATX and MTX options? I know curved-neck KLZE never came with an MTX cause those came out of Millenia's, but all ZE's, I doubt that.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
User avatar
relisys_3200
Regular Member
Posts: 875
Joined: November 11th, 2004, 2:01 am
Location: London / Ontario / Canada
Contact:

Post by relisys_3200 »

Nd4SpdSe wrote:I wish.
babyblueMX3 wrote:ya stock tranny fits fine...and no klze came with mtx too
What? What about the MX-6's or 626's I know they both have ATX and MTX options? I know curved-neck KLZE never came with an MTX cause those came out of Millenia's, but all ZE's, I doubt that.
He wasnt saying that they never came with MTX....He was answering the question: "i read that the KLZE was only ever equipped with an auto tranny...is this correct?" with a "no" response.
Brandon
1992 MX-3 GS-ZE
Image
User avatar
Nd4SpdSe
Senior Member
Posts: 11212
Joined: May 25th, 2002, 2:01 am
Location: Québec City, Quebec, Canada
Contact:

Post by Nd4SpdSe »

ahh! Ok, i understand now!

babyblueMX3, learn to type English ;)
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
Post Reply

Return to “Drag Strip/Track Racing”