best harness and ecu for bpt??

Joey's mx · Post by **Joey's mx** » July 11th, 2005, 5:58 pm

What would the best wiring harness and ecu be for the bpt engines?? What mods have to be done to the harness for it to work with that engine???

Franko · Post by **Franko** » July 13th, 2005, 9:50 am

92 or 93 MX-3 RS harness can be easily modified to work and the best ecu is the bp26 but really any one of the proper jspec ecus will be fine. DO NOT get that reprogrammed protege ecu.. It is s---!
Finding a ecu is going to be the hard part. In the end you can always go standalone, I recomend a haltech e6x. It is easier to tune with its 'real time' tuning. They are alot cheaper now due to them having some problems with the early models (not connecting to the laptop and such). It has gotten off to a bad start so they lowered the price.

swalltr207jg · Post by **swalltr207jg** » August 11th, 2005, 3:13 am

best ecu is the bp26 as previously stated, and the best harness would be the jdm gtx harness that corksport sells

jschrauwen · Post by **jschrauwen** » August 14th, 2005, 7:38 pm

Franko wrote: I recomend a haltech e6x. It is easier to tune with its 'real time' tuning. They are alot cheaper now due to them having some problems with the early models (not connecting to the laptop and such). It has gotten off to a bad start so they lowered the price.

Franko, when you say a lot cheaper, how much is a lot cheaper? Last one I saw on ebay was nearly $1,400 cdn.

Franko · Post by **Franko** » August 15th, 2005, 8:49 pm

that one is definately overpriced.. They were like 1600 but went down to about 1000..