[FS] direct bolt up lambo doors!
- bluebullet
- Regular Member
- Posts: 269
- Joined: January 13th, 2004, 2:01 am
- Location: Toronto
[FS] direct bolt up lambo doors!
i ordered these door hinges from shea, i was going to have them put on while my car was in the body shop but he never had sent me the shocks and the door didnt sit right without the shocks and now my side skirts are molded in so i lost out! i redrilled the holes to fit the mx-3 so it is basically a direct bolt up, i also had them painted blue to match my car so they wont rust. looking to get around $500 CAD without shocks and u can get them off of shea. i want these gone since they serve me no purpose! my loss is your gain!
-
- Regular Member
- Posts: 205
- Joined: August 29th, 2004, 2:01 am
- Location: Rahway, NJ
- bluebullet
- Regular Member
- Posts: 269
- Joined: January 13th, 2004, 2:01 am
- Location: Toronto
- cjthor
- Forum Moderator
- Posts: 5018
- Joined: November 26th, 2000, 2:01 am
- Location: Portland Oregon
- Contact:
Do you have aol messenger or yahoo? I would like to talk to you about your hinges please. My aol name is Rogue MX3 and my yahoo is mudslinger7785ooELMOoo wrote:I HAVE THEM AND WILL BE ON NEXT WEEK :>:>:>:>:>
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
- ooELMOoo
- Regular Member
- Posts: 372
- Joined: April 28th, 2005, 2:32 am
- Location: Vancouver, BC , Canada
no i only have msn messenger ....im a canadian ay...lol jj im english just live in canada.......my msn is buzyhands69@hotmail.com
----------------
| CUSTOM X3|
----------------
| CUSTOM X3|
----------------
-
- Regular Member
- Posts: 205
- Joined: August 29th, 2004, 2:01 am
- Location: Rahway, NJ
- ooELMOoo
- Regular Member
- Posts: 372
- Joined: April 28th, 2005, 2:32 am
- Location: Vancouver, BC , Canada
i already tackeled the fenders i just heated it up and took my trusty sledge(small) hammer to it and its flush.....I didnt want to cut alot of the inner fender because it holds most the strenght for the front end. Push i have to get it inspected after to meet icbc(basterds) standerds and this was the only way...I already have one hidge on but with but without the shocks its a b---- to lift up and doesn close straight......all will be right when the shocks come and i can post pics
----------------
| CUSTOM X3|
----------------
| CUSTOM X3|
----------------
-
- Regular Member
- Posts: 205
- Joined: August 29th, 2004, 2:01 am
- Location: Rahway, NJ