MX-3 interior parts for sale

Do you have an MX-3 related item for sale? Post a quick note here.
Post Reply
SuperStealth
Regular Member
Posts: 54
Joined: March 21st, 2004, 2:01 am
Location: Concord, NC
Contact:

MX-3 interior parts for sale

Post by SuperStealth »

I have lots of interior parts of a 92RS and a 93RS for sale. I had a 92 RS that was completely stripped out down to the frame as I was getting ready to customize it, then I decided to get a new 93, and did the same to that one, so I have enough interior parts for one whole car, plus lots of duplicates. I will accept any reasonable offer for these parts since I just want to get them out of my apartment. For big items such as seats, I'd prefer a local pick-up, although I am open for shipping. I live in Mooresville, NC. I can get you pictures if you want as well. Thanks :D

2 Driver side seats
2 Passenger side seats
2 rear seats
2 rear fold down part of seat
door panels
trunk trim pieces
rear trim pieces
plastic pillar pieces
window cranks
a/c vents
front console
center console
various switches, bolts, etc.
shift knob and boot
2 sets of rear seat belt assemblies
and probably any other interior part you could think of

email me at jjc53@drexel.edu since I check that several times a day
SuperStealth
Regular Member
Posts: 54
Joined: March 21st, 2004, 2:01 am
Location: Concord, NC
Contact:

Post by SuperStealth »

Just wanted to let you know I also have a steering wheel (non airbag), kick panels, door sills, jack and tire iron set, 2 spare tires, and the interior carpet.

~ Jim
User avatar
dj inferno
Regular Member
Posts: 318
Joined: November 9th, 2003, 2:01 am
Location: MN
Contact:

Post by dj inferno »

i want the shifter boot and the center councle peice that flips up and down... as long as it isn't cracked...
give me a price... hopefully cheap.
SuperStealth
Regular Member
Posts: 54
Joined: March 21st, 2004, 2:01 am
Location: Concord, NC
Contact:

Post by SuperStealth »

Do you want all three pieces of the center console, or just the back part with the flip lid/cup holder? Because there is also the part that the shift boot screws to and holds the ash tray, and then there is also the part that connects the two of them together.

If you just want the back part, $20 including shipping.
If you want all three including the boot, $35 including shipping.

I see these selling on ebay for over $50 and that doesn't include shipping, so I'm assuming you would consider these cheap prices.

Thanks for looking.

~ Jim
User avatar
jschrauwen
Forum Moderator
Posts: 6052
Joined: September 27th, 2003, 2:01 am
Location: Frankford, Ontario, Canada
Contact:

Post by jschrauwen »

Jim, email sent.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
Image
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
User avatar
93SOHC
Regular Member
Posts: 1875
Joined: November 21st, 2004, 2:01 am
Location: Lake Villa IL usa

Post by 93SOHC »

Hey, I emailed you about a trunk panel a while ago. No response, guess i'll try again
93SE-KLDE Theres a big peice of metal inside my other peice of metal now...weird???
Image
SuperStealth
Regular Member
Posts: 54
Joined: March 21st, 2004, 2:01 am
Location: Concord, NC
Contact:

Post by SuperStealth »

Sorry, I haven't gotten any emails about trunk panels. My email is jjc53@drexel.edu

I can answer questions on here as well, I just prefer email since I can respond to everyone quicker, but either way is fine.

~ Jim
User avatar
93SOHC
Regular Member
Posts: 1875
Joined: November 21st, 2004, 2:01 am
Location: Lake Villa IL usa

Post by 93SOHC »

I need the left(d/s) trunk panel in black. Its the part that has the speaker grille, flap thing, and covers the entire strut tower. Must be in great shape(I am replacing a cracked one, so I don't want another cracked one obviously) Let me know
93SE-KLDE Theres a big peice of metal inside my other peice of metal now...weird???
Image
SuperStealth
Regular Member
Posts: 54
Joined: March 21st, 2004, 2:01 am
Location: Concord, NC
Contact:

Post by SuperStealth »

93SOHC, I have the piece you are looking for with no cracks at all. If that's all you want I can send that out to you. I have already sold the speaker cover and the flap thing for both sides. You can easily swap your speaker cover and flip thing to this one though.
Lemme know.

Thanks!
User avatar
93SOHC
Regular Member
Posts: 1875
Joined: November 21st, 2004, 2:01 am
Location: Lake Villa IL usa

Post by 93SOHC »

cool man, The flap and cover on mine is fine, so that will work. Just PM me a price and shipping quote to Burlington WI 53105. Thanks a million!
93SE-KLDE Theres a big peice of metal inside my other peice of metal now...weird???
Image
User avatar
mx3tuner
Regular Member
Posts: 65
Joined: March 23rd, 2005, 5:17 pm
Contact:

Post by mx3tuner »

what color and condition are the seats? how much you want for a set?
User avatar
mx3tuner
Regular Member
Posts: 65
Joined: March 23rd, 2005, 5:17 pm
Contact:

Post by mx3tuner »

what color and condition are the seats? how much you want for a set?
User avatar
Teal_93
Regular Member
Posts: 591
Joined: April 14th, 2004, 2:01 am
Location: Iowa

Post by Teal_93 »

Did either of these cars have manual seatbelts? If so i need the buckle that the seat belts click into. They are bolted to the inside of the seats.

If you have them please pm me.
User avatar
Teal_93
Regular Member
Posts: 591
Joined: April 14th, 2004, 2:01 am
Location: Iowa

Post by Teal_93 »

Did either of these cars have manual seatbelts? If so i need the buckle that the seat belts click into. They are bolted to the inside of the seats.

If you have them please pm me.
User avatar
Teal_93
Regular Member
Posts: 591
Joined: April 14th, 2004, 2:01 am
Location: Iowa

Post by Teal_93 »

Did either of these cars have manual seatbelts? If so i need the buckle that the seat belts click into. They are bolted to the inside of the seats.

If you have them please pm me.
Post Reply

Return to “MX-3 Related Items For Sale/Trade”