VICS wires...

4-Cyl. Technical/Performance Discussions
Post Reply
Domnknpimp
Regular Member
Posts: 111
Joined: July 31st, 2004, 2:01 am
Location: Miami, FL

VICS wires...

Post by Domnknpimp »

Hi, I'm trying to intall the vics manually, but wanted to be sure with wire was which, or if it even matters..... Which one do i put to positive (on the switch) and which one goes to ground.... thanks
User avatar
Shady469
Supporting Member
Posts: 722
Joined: June 7th, 2001, 2:01 am
Location: Tha "U"!! (Hoo-ville Va.)
Contact:

Post by Shady469 »

i ran the black wire with a red/orange band to the pin in the ecu. the other one, i think white with red stripe i tapped into the injector harness using coordinating wires.
B6T powered MX-3 - sold
Stage 3ish 03 WRX - sold
03 S2000 - current/ for sale
Post Reply

Return to “4-Cyl. Technical/Performance”