TOP 1/4 MILE TIMES

A forum for Drag Strip/Track Racing Discussions. (NO Street Racing or Kill Stories, they WILL be deleted.)
osargeant
Regular Member
Posts: 341
Joined: December 17th, 2001, 2:01 am
Location: Bridgetown, Barbados
Contact:

TOP 1/4 MILE TIMES

Post by osargeant »

Hey folks,

I think we should start a top 1/4mile post with like 3 sections, Overall, 4cycl and V6 where we list the top 10 or 15 times for each category. This would give the MX3 folks out there something to aim for performance wise. I know that we have some people out there putting down some good times so it would be interesting.

What do you guys think?
JSpec Turbo MX3 (1.6 DOHC)
http://www.cardomain.com/memberpage/310985

Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
User avatar
Shady469
Supporting Member
Posts: 722
Joined: June 7th, 2001, 2:01 am
Location: Tha "U"!! (Hoo-ville Va.)
Contact:

Post by Shady469 »

http://www.mx-3.com/phpbb2/viewtopic.ph ... t=1+4+mile
this is the one from last summer. feel free to pick through and separate.. :D
i think when the tracks start opening back up there will be alot more people who will contribute...
B6T powered MX-3 - sold
Stage 3ish 03 WRX - sold
03 S2000 - current/ for sale
osargeant
Regular Member
Posts: 341
Joined: December 17th, 2001, 2:01 am
Location: Bridgetown, Barbados
Contact:

Post by osargeant »

bump :P
JSpec Turbo MX3 (1.6 DOHC)
http://www.cardomain.com/memberpage/310985

Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Post by babyblueMX3 »

so what you guys wanna do? start a whole new thread for '05? we could do like we did last time..post times and update the first post with them like I did last year
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
osargeant
Regular Member
Posts: 341
Joined: December 17th, 2001, 2:01 am
Location: Bridgetown, Barbados
Contact:

Post by osargeant »

Well I think the first thing I need to do is to get off my lazy behind and actually do some times with my car, I havent timed the car in a while and have done tons of mods since the last time. :)

I think we should start a new thread for 2005 though.
JSpec Turbo MX3 (1.6 DOHC)
http://www.cardomain.com/memberpage/310985

Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Post by babyblueMX3 »

I don't know if this site support this but I like what Probetalk did..a timslip data base where the users can enter their infos and it compile automatically. I'll post it in the recommendation section
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
timpronk
Regular Member
Posts: 603
Joined: August 2nd, 2001, 2:01 am
Location: Brantford, Ontario, Canada
Contact:

Post by timpronk »

I would like to see a list with all times ever done. That way we could have good resource for what to do to get to a specific et.

Just have the date in with the listed et's.

One place for all times, not just this season.
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Post by babyblueMX3 »

that's what I was thinking too...I talked to Jeff about it, he said he'll look at it when he'll have time
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Gro Harlem
Senior Member
Posts: 3391
Joined: November 30th, 2001, 2:01 am
Location: Stuttgart, Deutschland
Contact:

Post by Gro Harlem »

Require people to post pics of their timeslips b/c *gasp* believe it or not...most people are full of sh1t half the time when it comes to 1/4 mile times.

Probetalk has a much better database IMO since they dont' allow much BS. if someone posts "I ran a 13 with my KLDE probe" they always call BS and delete the post if he doesn't prove it w/ a time slip.


I like probetalks dyno database more. It shows all the mods ppl do between dyno runs and you can get an idea for what kind of mods do what for you.
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Post by babyblueMX3 »

that is what exactly I ask Jeff but he hasn't look into it yet
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
User avatar
jkpgt96
Regular Member
Posts: 70
Joined: July 30th, 2005, 10:06 pm
Location: St. Louis

Post by jkpgt96 »

Yeah, the one over on probetalk is nice, most every forum i belong to has something to the effect, i think the forums could use something like that or atleast an updated thread about it..
Laser Red '96 GT-12:1-IBeams-10k RPM-EXT. OIL PUMP-COLT ONE-OFF CAMS-CUSTOM LONGTUBES-SHEETMETAL IM-BUILT HEADS-125 SHOT-PAR 3/4 GEARSETS-MFACTORY LSD-ETC..SHOULD BE A FUN RIDE..:thup:
http://www.cardomain.com/ride/542054
slowmx3
Regular Member
Posts: 161
Joined: August 19th, 2005, 1:40 am

Post by slowmx3 »

My best 1/4 mile time is 14.5 @95MPH.
1992 mx-3, a couple mods, i'm still a n00b
---Don't try and church your car up, MX-3's aren't fast---
User avatar
mitmaks
Senior Member
Posts: 8704
Joined: September 10th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Spokane, WA
Contact:

Post by mitmaks »

slowmx3 wrote:My best 1/4 mile time is 14.5 @95MPH.
what mods?
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
Image
slowmx3
Regular Member
Posts: 161
Joined: August 19th, 2005, 1:40 am

Post by slowmx3 »

stock, with an ebay electric supercharger. it works pretty well. :lol:
1992 mx-3, a couple mods, i'm still a n00b
---Don't try and church your car up, MX-3's aren't fast---
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:

Post by hgallegos915 »

woah ebay electric supercharger? have yoiu tried running without it? o.0 i imagine ze ..
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Post Reply

Return to “Drag Strip/Track Racing”