NEW T-3 turbo

G..S.. · Post by **G..S..** » February 24th, 2005, 11:40 pm

Ok so im going to try this again. I just posted this same topic in another part of this forum and no one helped.
I own a black Mazda Mx-3 GS with a custom muffler and a cold air intake!!!big deal hahah.... anyways i just went out and bought a T-3 turbo,used of course...rebuilt,no play in it. The problem i'm having is how to go about putting this thing on with hardly any engine space and the massive amounts of fabricating im going to have to do! "Lots of money". Anyways i'd like if someone could suggest something that could make this alot easier,and mabe where i could buy a cheap intake for my turbo! thanks

G..S.. · Post by **G..S..** » February 24th, 2005, 11:46 pm

Oops its not the intake i need its the manifold for the turbo....srry

BuGS · Post by **BuGS** » February 25th, 2005, 12:49 am

Most guys have to make them custom. But they usually have to locate the turbo to the driver's side of the engine the route the exhaust piping down from there. That is so far the most common way V6 guys have routed it that I know of...

rdawg000 · Post by **rdawg000** » February 25th, 2005, 7:27 am

if u look at the post "You might crap you pants" in the Forced induction section i posted some picks of what the piping looks like for a klde/klze turbo