F/S Red 92 GS
-
- Regular Member
- Posts: 115
- Joined: September 6th, 2003, 2:01 am
- Location: Brantford, Ontario
F/S Red 92 GS
Need to sell my red 92 GS asap. All offers considered. It DOES run, but it DOES need work, internal and external. Wish I had pics but dont.
Details: 239XXXkm, front brakes need doing, calipers are fine. New front tires needed. New passenger fender, and door needed. As well the front bumper is cracked, and there is a vacuum leak(the accordian hose im told). Looking for around 600$ o.b.o.
Brad
dark_chasm40@hotmail.com
Details: 239XXXkm, front brakes need doing, calipers are fine. New front tires needed. New passenger fender, and door needed. As well the front bumper is cracked, and there is a vacuum leak(the accordian hose im told). Looking for around 600$ o.b.o.
Brad
dark_chasm40@hotmail.com
Last edited by Bradmx32003 on February 8th, 2005, 8:22 pm, edited 1 time in total.
Red 1992 Mx-3 GS, all stock.
-
- Regular Member
- Posts: 115
- Joined: September 6th, 2003, 2:01 am
- Location: Brantford, Ontario
-
- Regular Member
- Posts: 115
- Joined: September 6th, 2003, 2:01 am
- Location: Brantford, Ontario
-
- Regular Member
- Posts: 208
- Joined: August 26th, 2004, 2:01 am
- Location: Simcoe
-
- Regular Member
- Posts: 115
- Joined: September 6th, 2003, 2:01 am
- Location: Brantford, Ontario
-
- Regular Member
- Posts: 115
- Joined: September 6th, 2003, 2:01 am
- Location: Brantford, Ontario
-
- Supporting Member
- Posts: 730
- Joined: January 11th, 2003, 2:01 am
- Location: Jacksonville, FL Area
If only I lived closer...
'93 GS sporting 31 ZE, 36 ECU, Millenia IM & TB, Beefed up tranny, Fidanza FW, CM Stage II-R, Al UDP, HS Headers, MF Hi-Flow CAT, 2.5" Piping, CAI, MGC Wires, MS Mounts, B&M SS, Bronzoils, SS B & C Lines, Brembos...more.
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."
- ovendenk
- Supporting Member
- Posts: 911
- Joined: January 12th, 2004, 2:01 am
- Location: Kamloops, BC
- Contact:
how're the rear quarter panels? i might plan a road trip if this works out. how many hours of driving do you think it is to ottawa?
kevin (aka The Oven)
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462