Desktop Dyno?

projectmx · Post by **projectmx** » January 16th, 2005, 3:53 pm

I have the desktop dyno program and i want to get all the settings for the stock dohc engine so i can look at some possibilities for various setups... but i dont know where to find the info i need and was hoping someone might know where to look or might know some of the specs i am looking for...

Bore: 3.07 in.
Stroke: 3.28 in.
Intake valve: ? in.
Exhaust Valve: ? in.
Compression ratio: 9:1
Induction flow: ? cfm
Manifold Type:
Cam specs:

any helpful posts will be very much appreciated

Ruben MX-3 · Post by **Ruben MX-3** » January 16th, 2005, 4:57 pm

alrite buddy... i'll help u with wut i can

Cuz i know how hard it is to find help on these forums! LOL

here you go...

Bore x Stroke (mm) [in]: (78.0 x 83.6) [3.07 x 3.29]

I'll give u more info later man i gotta run out.

Peace

projectmx · Post by **projectmx** » January 17th, 2005, 8:17 am

thanks.. and if anyone wants to know i did use the search option... if we can get all this info it should go under 4 cyl FAQ cause that is good info to have

Franko · Post by **Franko** » January 20th, 2005, 1:09 pm

Where did you get that program from? I want it..

projectmx · Post by **projectmx** » January 20th, 2005, 2:20 pm

if it isn't too big i can probably email it to people...

.... doesn't anyone know any more of the specs i need to run the program correctly?

Joey's mx · Post by **Joey's mx** » January 20th, 2005, 2:40 pm

cam specs are 236 duration!! not sure on the lift!!! It would be nice to have the program!!

Typhoonk · Post by **Typhoonk** » January 20th, 2005, 6:58 pm

hook me up with the program if you can!! weirk@hotmail.com

Joey's mx · Post by **Joey's mx** » January 20th, 2005, 7:36 pm

what do you mean by valve ? in?? Stem diameter or stem to guide clearance?? Let me know i can tell you both!!

mazda20 · Post by **mazda20** » January 24th, 2005, 9:47 pm

I can host it on my FTP server if you guys want?

white94mx3 · Post by **white94mx3** » January 25th, 2005, 11:35 am

yeah, post it up, it would be a nice little tool to use with all the tuning I do