F/S: BOV,Manifold, etc...

Shady469 · Post by **Shady469** » December 10th, 2004, 5:44 pm

B6T turbo manifold: 125 shipped east coast everywhere else 150 (its heavy!) I'm also including a super clean VJ-14 for free because it has some shaft play.
PM or email me @ explosivemazda@yahoo.com

Shady469 · Post by **Shady469** » December 13th, 2004, 4:34 pm

Bump.

Shady469 · Post by **Shady469** » December 19th, 2004, 9:59 pm

93SOHC · Post by **93SOHC** » December 19th, 2004, 10:05 pm

Shady, does that mani fit the 1.6 sohc, by any chance?

Shady469 · Post by **Shady469** » December 20th, 2004, 1:06 am

nope. it may bolt up the ports are way different.

Shady469 · Post by **Shady469** » January 23rd, 2005, 3:41 pm

TTT c'mon all you DIY turbo guys; this is a steal!

Flashpoint2 · Post by **Flashpoint2** » January 23rd, 2005, 7:27 pm

I'm not good with turbo designations.. I would assume the VJ-14 is a small turbo?

Shady469 · Post by **Shady469** » January 23rd, 2005, 8:11 pm

You got it. It's the stock one on the USDM 323 GTX's and Mercury Capri XR-2's. It spools hella fast but starts to drop off after 6k, running 10+ psi anyway. People run 16psi on them but they lose effiency if the boost stays that high for long. I made a high 13 second pass at 101mph using one at 13 psi. I think 180-200whp is the max this turbo would support (with modifications to the engine as well...).
However people do hybrids with VJ-11's (its bigger oddly enough) with pretty good results. I think Josh had this done...
Wow, OK you probably didn't care to know all of that lol...

BuGS · Post by **BuGS** » January 27th, 2005, 8:42 pm

Bump cause shady is a cool guy!

weaponR · Post by **weaponR** » January 30th, 2005, 8:13 pm

is that manifold for the 1.6 dohc engine?

BuGS · Post by **BuGS** » February 8th, 2005, 12:26 am

Bump because i am excited about my injectors...

nos92mx3 · Post by **nos92mx3** » February 8th, 2005, 1:25 pm

shady how much play does the vj-14 have i may be interested, mines completley shot. Would it need a rebuild to be useable?
lemme know man the mx needs to be driven again!

MX-3.com

F/S: BOV,Manifold, etc...

F/S: B6T manifold+vj-14

Re: F/S: BOV,Manifold, etc...

Re: F/S: BOV,Manifold, etc...

Re: F/S: BOV,Manifold, etc...

Re: F/S: BOV,Manifold, etc...