back lights

This forum is for discussion of topics relating to MX-3 lighting such as Headlights, Tail lights, Accessory Lights, Interior Lights, Etc. For example, Rear Euro Altezza Style Tail lights, Headlight units, LED's, HID's, Bulbs, Interior lights, Neons, Strobes, Auxillary Lights/Fogs or anything filament and gas discharge related.
Also anything dealing with the elctrical system.
Post Reply
User avatar
steven
Regular Member
Posts: 261
Joined: February 8th, 2003, 2:01 am
Location: hawaii

back lights

Post by steven »

hey guys my back altezza lights always get foggy is there a way not to make it foggy??
Top
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:
Contact hgallegos915

Post by hgallegos915 »

yes..wait for a really ot sunny day and seal that sucka up with some clear silicone around the edges. I saw a girl that sealed ers and misture was still in there because se forgot to have the lights heat up enoug to let moisture out. Also Some people I think heat them in the oven and seperate the clear lens from the light and then cealn them and reseal them. I wonder ow would they look without the clear lens hehe..ok dont wanna get off post. So yeah do this. I had this problem with my black alteezas here in el paso we are currently at around 75 degrees F it was ot enough for moisture to get out in a couple of rs. I havent seen any moisture after that.
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Top
Post Reply

Return to “Electrical & Lighting”