ATTENTION: EVERYONE F/S

A Forum For Ontario MX-3 Club Related Topics.
msequence
Regular Member
Posts: 59
Joined: November 11th, 2004, 2:01 am
Location: Mississauga

Post by msequence »

front engine mount please

Matt
Chopperpozz
Regular Member
Posts: 57
Joined: April 19th, 2004, 2:01 am
Location: Niagara Falls

Post by Chopperpozz »

i'll buy the 02 sensors off ya!
93 Black KL-DE powered Mx-3.
E-mail - chopperpozz@hotmail.com
User avatar
punkindrublic
Regular Member
Posts: 219
Joined: January 12th, 2004, 2:01 am
Location: Hamilton, Ontario
Contact:

Post by punkindrublic »

ok everyone since i am having little luck with parting it out, im gonna try and sell the whole thing !!!

700 bucks will take it, and if u think that is too much email me and we can figure something out, im very easy so any reasonable offer i will take !!!

and for those who need some parts (all the pm are gone from the old forum so i cant really remember who pm'd me so anyone who is serious about parts email me at

mpender5@cogeco.ca

somebody just take this car come on !!!!!!!!!!!!
1995 MX-3 GS (black) stock engine... for now hehe...
MSfront... mssides... GS wing...
5" tach w/shift light... A/F, Volt, & Oil Pressure gauges in dash vents... front and rear strut braces....
WORK IN PROGRESS
Chopperpozz
Regular Member
Posts: 57
Joined: April 19th, 2004, 2:01 am
Location: Niagara Falls

Post by Chopperpozz »

my offer is 300
93 Black KL-DE powered Mx-3.
E-mail - chopperpozz@hotmail.com
User avatar
punkindrublic
Regular Member
Posts: 219
Joined: January 12th, 2004, 2:01 am
Location: Hamilton, Ontario
Contact:

Post by punkindrublic »

300 for the whole car, hhahaha thats pretty funny, the wreckers will give me 600 so 300 isnt worth it man sorry u gotta make a better offer than that !!!
1995 MX-3 GS (black) stock engine... for now hehe...
MSfront... mssides... GS wing...
5" tach w/shift light... A/F, Volt, & Oil Pressure gauges in dash vents... front and rear strut braces....
WORK IN PROGRESS
User avatar
punkindrublic
Regular Member
Posts: 219
Joined: January 12th, 2004, 2:01 am
Location: Hamilton, Ontario
Contact:

Post by punkindrublic »

the motor is still in it so i cant get the mount for u msequece, i do have the o2 sensor though chopperzzzzzzzzz
1995 MX-3 GS (black) stock engine... for now hehe...
MSfront... mssides... GS wing...
5" tach w/shift light... A/F, Volt, & Oil Pressure gauges in dash vents... front and rear strut braces....
WORK IN PROGRESS
msequence
Regular Member
Posts: 59
Joined: November 11th, 2004, 2:01 am
Location: Mississauga

Post by msequence »

tru tru.. but the front is ez to take off U can do it with a bit of albow grease or just let me know when you are ready mayte.. I need it ASAP as well as the trunk trim covers.. for strutts etc for the rear .. I need if you have in black..

Matt
Chopperpozz
Regular Member
Posts: 57
Joined: April 19th, 2004, 2:01 am
Location: Niagara Falls

Post by Chopperpozz »

haha i had to try my best come on! i will take the 02's from ya
93 Black KL-DE powered Mx-3.
E-mail - chopperpozz@hotmail.com
User avatar
punkindrublic
Regular Member
Posts: 219
Joined: January 12th, 2004, 2:01 am
Location: Hamilton, Ontario
Contact:

Post by punkindrublic »

haha well it was a good try, 40 bucks for the o2 sensor !!
1995 MX-3 GS (black) stock engine... for now hehe...
MSfront... mssides... GS wing...
5" tach w/shift light... A/F, Volt, & Oil Pressure gauges in dash vents... front and rear strut braces....
WORK IN PROGRESS
Chopperpozz
Regular Member
Posts: 57
Joined: April 19th, 2004, 2:01 am
Location: Niagara Falls

Post by Chopperpozz »

u mean sensors right???
93 Black KL-DE powered Mx-3.
E-mail - chopperpozz@hotmail.com
User avatar
punkindrublic
Regular Member
Posts: 219
Joined: January 12th, 2004, 2:01 am
Location: Hamilton, Ontario
Contact:

Post by punkindrublic »

ya i ment sensors but i got some bad news !!!!!
The insurance sompany is comin to take the car away, apparently they guy i got it off of, his insurance company gave him money for the car and now they want it, i'll see if i can pull the 02 sensors of for ya along with a couple other minor things !!!! this is bull crap, i cant believe this,

so too everyone who wanted something im sorry guys i'll see what i can do about that stuff, i'll try and rip some of it off but i might get in s--- so ?? we'll have to see !!!!!!!

im soo pissed guys !!!!!!!!!!

sorry
1995 MX-3 GS (black) stock engine... for now hehe...
MSfront... mssides... GS wing...
5" tach w/shift light... A/F, Volt, & Oil Pressure gauges in dash vents... front and rear strut braces....
WORK IN PROGRESS
User avatar
punkindrublic
Regular Member
Posts: 219
Joined: January 12th, 2004, 2:01 am
Location: Hamilton, Ontario
Contact:

Post by punkindrublic »

i have some good news for u guys, i might be able to keep the car so keep checkin this thread for more info
1995 MX-3 GS (black) stock engine... for now hehe...
MSfront... mssides... GS wing...
5" tach w/shift light... A/F, Volt, & Oil Pressure gauges in dash vents... front and rear strut braces....
WORK IN PROGRESS
cignal69
Junior Member
Posts: 4
Joined: January 7th, 2005, 3:17 pm

Post by cignal69 »

I'm looking for the whole A/C setup for a 92 GS. Price?
Mad_Medeiros
Regular Member
Posts: 208
Joined: August 26th, 2004, 2:01 am
Location: Simcoe

Post by Mad_Medeiros »

If you keep the car, how does 500 sound? I live only 35 minuits away from you. if not, I need the WHOLE intake system.. infact how much would you sell the whole engine for? remeber I'm not far from you so this won't be a problem at all. me and a friend are looking into buying it together and using it as our parts car.
stock 93 GS, 5 speed
User avatar
punkindrublic
Regular Member
Posts: 219
Joined: January 12th, 2004, 2:01 am
Location: Hamilton, Ontario
Contact:

Post by punkindrublic »

hey everyone the car is gone, i went away for the weekend to montreal and they came and took the car, bastards !!! Sorry everyone !!!!!!
1995 MX-3 GS (black) stock engine... for now hehe...
MSfront... mssides... GS wing...
5" tach w/shift light... A/F, Volt, & Oil Pressure gauges in dash vents... front and rear strut braces....
WORK IN PROGRESS
Post Reply

Return to “Ontario MX-3 Club”