head and tail light conversion

This forum is for discussion of topics relating to MX-3 lighting such as Headlights, Tail lights, Accessory Lights, Interior Lights, Etc. For example, Rear Euro Altezza Style Tail lights, Headlight units, LED's, HID's, Bulbs, Interior lights, Neons, Strobes, Auxillary Lights/Fogs or anything filament and gas discharge related.
Also anything dealing with the elctrical system.
Post Reply
DYLAN
Regular Member
Posts: 34
Joined: October 6th, 2004, 2:01 am
Location: Vancouver B.C Canada

head and tail light conversion

Post by DYLAN »

i am thinking about doing a 98 supra head and tail lihgt conversion to my 92 mx3 and i just wanted to know if anyone has done this before or knows someone who has. any helpful hints would be greatly appreciated.thank.
Top
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:
Contact hgallegos915

Re: head and tail light conversion

Post by hgallegos915 »

I havent done it well if fitting the civic projectors was a pain..I would imagine the supra lights would be worse. Since they are way bogger i believe and the radiator might not ler you have enough room. My civic lights are close to the radiator.
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Top
Post Reply

Return to “Electrical & Lighting”