KL-ZE in Toronto
- MX-3 Money
- Supporting Member
- Posts: 563
- Joined: May 27th, 2004, 2:01 am
- Location: Oshawa, ON, Canada
KL-ZE in Toronto
Well i knew it would happen sooner or later, but my head gasket is about to blow. So now its either pay the 1200 bucks to get it fixed or finally get my ZE!!! So where can I source a ze from in the Toronto/Oshawa area. I know about A-spec but there website seems to be down and i can't get a phone number. So anyone know about other ZE suppliers??? I know i just posted this in the V6 fourm, but only got one post. Plus I know this question has been asked a lot before so even just a link to and old post would be good. Thanks.
1993 MX-3 GS 5 spd, KL-ZE swap, kl31 ecu, 110 amp alternator, Unorthodox Underdrive Pulley, SSautocrome headers, High flow cat, Pacesetter high flow cat-back, B&M shortshifter, Clear Sigs/Sides.
- azn_kai
- Junior Member
- Posts: 29
- Joined: May 25th, 2004, 2:01 am
- Location: scarborough, ontario canada
- Contact:
Re: KL-ZE in Toronto
shine jdm auto parts. they sells klze engines or any engines. been there once and you can get to pick which one you like. address is: 55 Midwest Road Scarborough Ontario or tel: 416 285-1223
k.a.melecio
1992 GS Automatic (R.I.P.)
1993 GS Manual
<img src="http://memimage.cardomain.net/member_im ... 9363_1.jpg">
Victoria Park Avenue
1992 GS Automatic (R.I.P.)
1993 GS Manual
<img src="http://memimage.cardomain.net/member_im ... 9363_1.jpg">
Victoria Park Avenue
- azn_kai
- Junior Member
- Posts: 29
- Joined: May 25th, 2004, 2:01 am
- Location: scarborough, ontario canada
- Contact:
Re: KL-ZE in Toronto
oops... my bad tel: 416 285-0223
k.a.melecio
1992 GS Automatic (R.I.P.)
1993 GS Manual
<img src="http://memimage.cardomain.net/member_im ... 9363_1.jpg">
Victoria Park Avenue
1992 GS Automatic (R.I.P.)
1993 GS Manual
<img src="http://memimage.cardomain.net/member_im ... 9363_1.jpg">
Victoria Park Avenue
-
- Senior Member
- Posts: 2030
- Joined: February 3rd, 2002, 2:01 am
- Location: Toronto, Ontario, Canada
- Contact:
Re: KL-ZE in Toronto
DO NOT DEAL WITH A-SPEC.
I you want to hear about mine or some of my buddy's experience there, let me know and I will email you.
I you want to hear about mine or some of my buddy's experience there, let me know and I will email you.
- azn_kai
- Junior Member
- Posts: 29
- Joined: May 25th, 2004, 2:01 am
- Location: scarborough, ontario canada
- Contact:
Re: KL-ZE in Toronto
sure please.. azn_kai2000@yahoo.com and where is this A-SPEC place anyway?
k.a.melecio
1992 GS Automatic (R.I.P.)
1993 GS Manual
<img src="http://memimage.cardomain.net/member_im ... 9363_1.jpg">
Victoria Park Avenue
1992 GS Automatic (R.I.P.)
1993 GS Manual
<img src="http://memimage.cardomain.net/member_im ... 9363_1.jpg">
Victoria Park Avenue
-
- Regular Member
- Posts: 193
- Joined: May 4th, 2004, 2:01 am
- Location: waterdown, ontario
- Contact:
yeah
i got my engine put in at ASpec and I wouldn't do it again. I wouldn't minding reading about your experiences...
theincrediblemachine at hotmail dot com
if you have time
theincrediblemachine at hotmail dot com
if you have time
FOR SALE: 93 MX-3 SE
I called A-Spec today and asked for a price on a wiring harness, ECU, MAF, distributor, etc, etc... and they wanted $700 for it. I hope the guy was incredibally high when he quoted me that price. I could probably get an entire car for that much if I waited long enough. I called a few months ago when I needed a B6T for my 323GTX, and they quoted me some stupid number like $3000 for the long block. Its funny what some people think their stuff is worth.
-
- Regular Member
- Posts: 99
- Joined: October 7th, 2002, 2:01 am
- Location: Ridgetown, Ontario, Canada
- Contact: