New Project (while mx3 is down)
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
New Project (while mx3 is down)
its hard not to work on my car when i dont have anything i can do just yet so this is what happens
this is just a ruff fit to see how it works its bolted down and stable i just need fix it to where its straight as both sides are not on the same level OH and yes it does recline:
<img src="http://66.193.231.222/~alphamo/mx3chair.jpg" alt=" - " />
<img src="http://66.193.231.222/~alphamo/mx3chair1.jpg" alt=" - " />
<img src="http://66.193.231.222/~alphamo/mx3chair2.jpg" alt=" - " />
<img src="http://66.193.231.222/~alphamo/mx3chair3.jpg" alt=" - " />
<img src="http://66.193.231.222/~alphamo/mx3chair4.jpg" alt=" - " />
<small>[ December 20, 2004, 02:39 AM: Message edited by: Mnemonic ]</small>
this is just a ruff fit to see how it works its bolted down and stable i just need fix it to where its straight as both sides are not on the same level OH and yes it does recline:
<img src="http://66.193.231.222/~alphamo/mx3chair.jpg" alt=" - " />
<img src="http://66.193.231.222/~alphamo/mx3chair1.jpg" alt=" - " />
<img src="http://66.193.231.222/~alphamo/mx3chair2.jpg" alt=" - " />
<img src="http://66.193.231.222/~alphamo/mx3chair3.jpg" alt=" - " />
<img src="http://66.193.231.222/~alphamo/mx3chair4.jpg" alt=" - " />
<small>[ December 20, 2004, 02:39 AM: Message edited by: Mnemonic ]</small>
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Re: New Project (while mx3 is down)
um, nice? definatly some free time on your hands. if you could make a 2 seater loveseat....
-
- Regular Member
- Posts: 97
- Joined: March 15th, 2004, 2:01 am
- Location: Central America,El salvador
Re: New Project (while mx3 is down)
ahhahha that is just great!! good job
-
- Regular Member
- Posts: 528
- Joined: January 23rd, 2004, 2:01 am
- Location: East Grand Forks, MN
Re: New Project (while mx3 is down)
Awesome!! You even got mad props from Jeff!
THIS USER HAS BEEN BANNED, DO NOT DEAL WITH HIM. - MX-3.com Admin
- matt-gerrard
- Supporting Member
- Posts: 113
- Joined: August 23rd, 2004, 2:01 am
- Location: Denton,Texas.
- Contact:
Re: New Project (while mx3 is down)
DUDE... you are a man of men,the chair is tight, welldone.....M
<small>[ December 21, 2004, 04:28 PM: Message edited by: matt-gerrard ]</small>
<small>[ December 21, 2004, 04:28 PM: Message edited by: matt-gerrard ]</small>
I just love the cars that we have no matt-er(lol) how little or much you do to them there all so beautiful!Drive it, like you stole it!'92 gs V6
http://www.dfwmazdas.com/vbulletin/imag ... 1148070546
http://www.dfwmazdas.com/vbulletin/imag ... 1148070546
Re: New Project (while mx3 is down)
Didn't Gregory have a chair like this too? Seem to remember seeing a pic a while back.
“You’ll find, that the only thing you can do easily is be wrong, and that’s hardly worth the effort.”
Re: New Project (while mx3 is down)
Absolutely awesome!
Is that a functional speaker??
Nice work!
Is that a functional speaker??
Nice work!
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
- hotsiit
- Supporting Member
- Posts: 1078
- Joined: March 4th, 2001, 2:01 am
- Location: Allentown, PA
- Contact:
Re: New Project (while mx3 is down)
totally freaking awsome!......I love it
Chris--It's HOTNESS, you wouldn't understand! -- Donate to MX-3.com--It'll make you feel good!
http://www.cardomain.com/id/colonelsmx3
1993 Mazda MX-3 RS-Turbo
1993 Mazda RX-7 touring
1983 Mazda RX-7 GSL
1995 Subaru Impreza L AWD Sedan
1987 Jeep Comanche
http://www.cardomain.com/id/colonelsmx3
1993 Mazda MX-3 RS-Turbo
1993 Mazda RX-7 touring
1983 Mazda RX-7 GSL
1995 Subaru Impreza L AWD Sedan
1987 Jeep Comanche
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: New Project (while mx3 is down)
yea the speaker is functional i keep it low the 2 other speakers bring my highs and mids and the one under the desk is the bass, and then entire system is wired up to 2 500 watt rms car amps mwhahahaha ive got a power converter to run the amps.
i know 2 other guys have turned mx3 seats into office chairs. its not hard at all you just remove the original seat cushon from the stand, measure you out a board, take of the mx3 seat mounting brackets off, line the board with the holes that original go into the mx3s seat and mount it down then mount the arm rest back down to the new board.
i know 2 other guys have turned mx3 seats into office chairs. its not hard at all you just remove the original seat cushon from the stand, measure you out a board, take of the mx3 seat mounting brackets off, line the board with the holes that original go into the mx3s seat and mount it down then mount the arm rest back down to the new board.
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
- fry_81
- Regular Member
- Posts: 1898
- Joined: April 22nd, 2004, 2:01 am
- Location: Barrie, Ontario, Canada
- Contact:
Re: New Project (while mx3 is down)
there was also someone a few months back who made a couch out of the back seats, cant remember who though, but it was cool lol.
1994 5spd GS Parts Car For Sale 800obo. e-mail for details. fry_81@hotmail.com
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: New Project (while mx3 is down)
next im wrapping the base and the arm rests in CF and im gonna rewrap the seat with cobalt blue leather for the outside and a plush white leather for the insert gonna look Pimp
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)