Check this out...
- Franko
- Supporting Member
- Posts: 1443
- Joined: September 2nd, 2002, 2:01 am
- Location: Newfoundland, Canada
- Contact:
Check this out...
Eunos 30X baby!
I dont know how long this site will host them for..
<img src="http://www.2and2.net/Uploads/Images/30x2.jpg" alt=" - " />
Look, Only $233,000.00!
<img src="http://www.2and2.net/Uploads/Images/30x1.jpg" alt=" - " />
<img src="http://www.2and2.net/Uploads/Images/kit.jpg" alt=" - " />
I would kill someone for these headlights!
<img src="http://www.2and2.net/Uploads/Images/bruce4.jpg" alt=" - " />
I dont know how long this site will host them for..
<img src="http://www.2and2.net/Uploads/Images/30x2.jpg" alt=" - " />
Look, Only $233,000.00!
<img src="http://www.2and2.net/Uploads/Images/30x1.jpg" alt=" - " />
<img src="http://www.2and2.net/Uploads/Images/kit.jpg" alt=" - " />
I would kill someone for these headlights!
<img src="http://www.2and2.net/Uploads/Images/bruce4.jpg" alt=" - " />
93 MX3, BP, Haltech E6X, Bully Six Puck Clutch, Pauter Rods, Wiseco Pistons, Port and Polish, Turbonetics T3/T4 Ball Bearing turbo and a partridge in a pear tree.
-
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: Check this out...
It looks lower then my car was stock.
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: Check this out...
love that Jspec mx3
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: Check this out...
j-spec is teh win!
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
- MX3-Freak
- Regular Member
- Posts: 955
- Joined: November 8th, 2003, 2:01 am
- Location: Gig Harbor Washington
- Contact:
Re: Check this out...
I can host em now in-case this site decides to delete them :p
Stock 1995 RS - Creek Blue
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
Re: Check this out...
Hey those top 2 are my car!!! Except mine is 5 speed manual and a 93 model.
“You’ll find, that the only thing you can do easily is be wrong, and that’s hardly worth the effort.”
-
- Regular Member
- Posts: 1749
- Joined: April 17th, 2002, 2:01 am
- Location: Okotoks, Alberta Canada
- Contact:
Re: Check this out...
it looks like my car
<img src="http://img87.exs.cx/img87/3261/CAR1.jpg" alt=" - " />
<img src="http://img87.exs.cx/img87/8273/CAR7.jpg" alt=" - " />
<small>[ October 20, 2004, 06:15 PM: Message edited by: curtklze ]</small>
<img src="http://img87.exs.cx/img87/3261/CAR1.jpg" alt=" - " />
<img src="http://img87.exs.cx/img87/8273/CAR7.jpg" alt=" - " />
<small>[ October 20, 2004, 06:15 PM: Message edited by: curtklze ]</small>
DONT SHIP WITH UPS!!! DIE UPS DIE!!!!!
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
- Sam Baker
- Regular Member
- Posts: 1461
- Joined: May 23rd, 2003, 2:01 am
- Location: Wellington, New Zealand
Re: Check this out...
that last pic is awesome.. Mazdaspeed rims!!! eh, too bad MS01's cost like $400+ each
92 Autozam AZ3
- Franko
- Supporting Member
- Posts: 1443
- Joined: September 2nd, 2002, 2:01 am
- Location: Newfoundland, Canada
- Contact:
Re: Check this out...
I found more.. Check these pics out..
<img src="http://home4u.hongkong.com/sports/carra ... e/30x4.jpg" alt=" - " />
<img src="http://home4u.hongkong.com/sports/carra ... /30x11.jpg" alt=" - " />
<img src="http://home4u.hongkong.com/sports/carra ... e/30x4.jpg" alt=" - " />
<img src="http://home4u.hongkong.com/sports/carra ... /30x11.jpg" alt=" - " />
93 MX3, BP, Haltech E6X, Bully Six Puck Clutch, Pauter Rods, Wiseco Pistons, Port and Polish, Turbonetics T3/T4 Ball Bearing turbo and a partridge in a pear tree.
-
- Regular Member
- Posts: 97
- Joined: March 15th, 2004, 2:01 am
- Location: Central America,El salvador
Re: Check this out...
$233,000 ?
-
- Regular Member
- Posts: 420
- Joined: November 7th, 2000, 2:01 am
- Location: London, ON, Canada
- Contact:
Re: Check this out...
as far as I know.... those are the same headlights that I have in my MX.... and if you are wondering... the Jspec headlamps are plastic also....
<img src="http://members.rogers.com/precidian/pre ... recid1.jpg" alt=" - " />
I use a H4 bulb instead of the normal 9004s....
<img src="http://members.rogers.com/precidian/pre ... recid1.jpg" alt=" - " />
I use a H4 bulb instead of the normal 9004s....
Re: Check this out...
I assumed mine was J Spec - its identical to the top 2 photos - right down to the wheels. I have glass headlights though....
“You’ll find, that the only thing you can do easily is be wrong, and that’s hardly worth the effort.”
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: Check this out...
j-specs im told dont have glass ones, the e-spec do and look just like that
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Re: Check this out...
Yea those 2 top brochures would be e-spec being Hong Kong in '92. Funny it doesn't mention a manual transmission option but is still a Eunos 30X.
“You’ll find, that the only thing you can do easily is be wrong, and that’s hardly worth the effort.”