Gauging interest for Nylatron shims for coilovers
Re: Gauging interest for Nylatron shims for coilovers
Okay, thanks for all the responses. Here is the latest on this, directly from Luc:
A kit of 8 Nylatron shims for the GC coilovers would normally cost $50USD through SRD. Luc is proposing a groupbuy cost of $45USD + $2.50 each for MX-3.com . A minimum of 10 kits will need to be sold to cover the cost for programming and purchase of the "log" of Nylatron.
Luc says that he hoped the price would be a little less, but because of the thickness of the shims, CNC needs to work at a very low speed. S&H will be about $3USD for airmail to most US locations. I'll have to inquire about Canadian and International shipping.
I'm assuming that SRD will head this groupbuy, and we'll get Jeff's permission to post it here.
Thanks for your patience guys!
<small>[ February 27, 2004, 02:20 PM: Message edited by: 2.5mx3 ]</small>
A kit of 8 Nylatron shims for the GC coilovers would normally cost $50USD through SRD. Luc is proposing a groupbuy cost of $45USD + $2.50 each for MX-3.com . A minimum of 10 kits will need to be sold to cover the cost for programming and purchase of the "log" of Nylatron.
Luc says that he hoped the price would be a little less, but because of the thickness of the shims, CNC needs to work at a very low speed. S&H will be about $3USD for airmail to most US locations. I'll have to inquire about Canadian and International shipping.
I'm assuming that SRD will head this groupbuy, and we'll get Jeff's permission to post it here.
Thanks for your patience guys!
<small>[ February 27, 2004, 02:20 PM: Message edited by: 2.5mx3 ]</small>
Hank
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
Re: Gauging interest for Nylatron shims for coilovers
I hope this goes through, I will be ordering my ground control's soon... So Hopefully I will get these soon ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
Re: Gauging interest for Nylatron shims for coilovers
Okay, thanks Jeff! I'll let you know.
Hank
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
Re: Gauging interest for Nylatron shims for coilovers
AWESOMASUPAPOWA!
1992 MX-3 GS
KLZE - Fidanza Flywheel - CM IIR Clutch - Millenia IM - UR Pulley - IM Spacers - KL36 ECU
KLZE - Fidanza Flywheel - CM IIR Clutch - Millenia IM - UR Pulley - IM Spacers - KL36 ECU
Re: Gauging interest for Nylatron shims for coilovers
Okay guys, as soon as Jeff gives me access to the Group Buy section, I will post all the info on what's going on, how to send payment, etc. Thanks again for your patience. ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
Hank
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
Re: Gauging interest for Nylatron shims for coilovers
Please check the Group Buy section for details. I have also put up an informal list of names of everyone who expressed interest earlier.
Lets get this project underway!
Thanks guys.
Lets get this project underway!
Thanks guys.
Hank
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
Re: Gauging interest for Nylatron shims for coilovers
Sorry for the bump again, but I need to get a couple more names for this GB. I haven't received emails from everyone that originally expressed interest, so please if you still want these, check the GB section and email me.
Thanks!
Thanks!
Hank
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
Re: Gauging interest for Nylatron shims for coilovers
I don`t have GC`s now, but I`m considering getting some one day, and I know I would like these then
oh, do the GC`s work with koni struts?
I`m not sure cause on the page it says BOGE SACHS Stock etc, and on the other it says Tokico.
I guess I should be able to use the ones for stoc struts etc though.
nope-mx3
![Smile :)](./images/smilies/icon_smile.gif)
oh, do the GC`s work with koni struts?
I`m not sure cause on the page it says BOGE SACHS Stock etc, and on the other it says Tokico.
I guess I should be able to use the ones for stoc struts etc though.
nope-mx3
:: 2001 Mazda Mx-5 Sport // 2013 Volvo V40 D2 Momentum ::
Re: Gauging interest for Nylatron shims for coilovers
This message is for "nope-mx3" and "playaa":
Do you guys still want to participate in this GB? Playaa, I can't find your email address so I was unable to send you a message. Nope-mx3, about the Koni's, they are simply inserts, so you would need either the stock strut housing or another strut (like Tokicos, etc) to use with them. So yes, they would work with the GC coilovers.
If anyone else is interested, please email me!!
Do you guys still want to participate in this GB? Playaa, I can't find your email address so I was unable to send you a message. Nope-mx3, about the Koni's, they are simply inserts, so you would need either the stock strut housing or another strut (like Tokicos, etc) to use with them. So yes, they would work with the GC coilovers.
If anyone else is interested, please email me!!
Hank
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
Re: Gauging interest for Nylatron shims for coilovers
Yes I am still interested email is playaa@sportsnimports.com ![Froggie Red :froggie_red:](./images/smilies/froggie_red.gif)
![Froggie Red :froggie_red:](./images/smilies/froggie_red.gif)
Re: Gauging interest for Nylatron shims for coilovers
Hey guys, this is the last post for these shims. They are shipping right now, but we have some left, so if you are interested, please email me or Luc (luc@srdperformance.com) as soon as possible so we can give you the discounted price.
Any extra pieces will be sold at a premium by SRD. Please see the Group Buy section for details.
I have yet to hear from "Playaa" about payment, so please get back to me and let me know if you are still interested.
Thanks!
Any extra pieces will be sold at a premium by SRD. Please see the Group Buy section for details.
I have yet to hear from "Playaa" about payment, so please get back to me and let me know if you are still interested.
Thanks!
Hank
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien