Struts for H&R springs
Struts for H&R springs
I just ordered my H&R springs, and now I need to get some struts to match them. I know the zx2 struts are made for eibach springs, but would they be my best choice? What other would be good choices?
-
- Regular Member
- Posts: 1821
- Joined: December 5th, 2001, 2:01 am
- Location: Gainesville
Re: Struts for H&R springs
-93 MR2
#129 E-stock
#129 E-stock
-
- Regular Member
- Posts: 779
- Joined: July 3rd, 2003, 2:01 am
- Location: Barrie, Ontario, Canada
- Contact:
Re: Struts for H&R springs
The best bang for you're buck is ZX2 Struts. You will need the following...
(2) Upper Thrust Bearings
(4) Dust boot covers
(1) Set of ZX2 Struts
(2) Upper Thrust Bearings
(4) Dust boot covers
(1) Set of ZX2 Struts
Re: Struts for H&R springs
Just buy the Koni adjustables.
I run these with H&R springs and it`s excellent.
Then you get the Whiteline rear swaybar.
nope-mx3
I run these with H&R springs and it`s excellent.
Then you get the Whiteline rear swaybar.
nope-mx3
:: 2001 Mazda Mx-5 Sport // 2013 Volvo V40 D2 Momentum ::
Re: Struts for H&R springs
I have the H&R springs mated to the ZX2 struts and the combo works quite well in my opinion. The ZX2 struts do indeed seem to be the best deal for the money. I have the stock 15" wheels on my GS and the ride is firm and a little bumpy, but not too bad. I'm going to get 17" wheels in the spring, and expect my comfort level to decrease by quite a bit.
'93 MX-3 GS
- D_Gagne
- Regular Member
- Posts: 312
- Joined: May 6th, 2003, 2:01 am
- Location: bonnyville,alberta
- Contact:
Re: Struts for H&R springs
were do i get zx2 struts and will they work doog with groiund controls? thanx dudes and i have 18 inch rims with 215/35 /18 rubber i wanna go like almost even with the wheel well lemme know what i should do thanx dudes
92 mx3,lime green paint 18 inch motegi mr7's,blitz front n rear bumper,fx side skirts,isotta wheel,ractive seats,ractive gtr aluminum wing,apexi exhaust, www.cardomain.com/id/livin_lime_mazda
-
- Regular Member
- Posts: 909
- Joined: March 15th, 2004, 2:01 am
- Location: Karlskrona, Sweden
- Contact:
Re: Struts for H&R springs
http://www.oemfordparts.comOriginally posted by D_Gagne:
were do i get zx2 struts