oxygen sensor

[gmoney23]

I am an air/fuel gauge and need to know where to find the oxygen sensor. Can someone help me find it and how hard is it to install this gauge?

[Talon_66]

Originally posted by Garrett Smith:
I am an air/fuel gauge

Your a Air/Fuel Guage? Wow man... Thats cool u must be pretty advanced

The 02 sensors are located on the front and rear downpipes. Open ur hood, look at the exhaust manifold, look down, and u will see some wires going to the downpipes. That is your 02 sensor.

I think if u want an accurate reading u want a wideband O2 sensor.

[gmoney23]

what is the wideband o2 sensor? How far down the manifold is it and do you know how many wires there are? (1.8/v6)?

[Talon_66]

What a Wideband 02 sensor is, and what It should look like.

[babyblueMX3]

dude don't hook up your s/f gauge to your o2 sensors..you can just wire it to the ecu ...
see this post
check third reply by gro harlem

[gmoney23]

so can you tell me how to get to my ecu? i really appreciate all of your help with this. i read the page you posted but im just not getting the clear picture any help..

[Custommx3]

under the stereo, remove the panel by your foot.

[gmoney23]

what wire am i attaching the a/f gauge to?

[babyblueMX3]

ok go on the passanger side of your car
remove the little plastic under the dash behind you stereo
now you should see the ecu
3 main pins should enter the ecu
you want to tap into the middle one

if you look at the pin on the wire side (looking as if the pin was plugged in the ecu) you should see somthing like that
------====-------
|1|2|3|4|5|6|7|8|
|9|A|B|C|D|E|F|G|
-----------------

the digits and letters represent each a wire...
number 7 and F represents both 02 sensors..
choose the one you want
IIRC when I tap it number 8 was empty..

good luck

[babyblueMX3]

forgot to ask..you got a gs or rs ??? all the time we were talking about the gs btw

[gmoney23]

i have the gs

[gmoney23]

hope im not portraying myself as stupid! There are three wire harness like things going into this they are all yellow, you said the middle harness;mine are in a cluster its hard to tell the rows like you sent on the diagram would you happen to know which wire COLOR? Do i need the 2 wires 7 and F or do i only need one? thanks for all your help?

i have the 1.8 v6 GS 1992