GROUND CONTROL Coilover kit (Question)

This forum is for Discussion on Suspension issues.
Post Reply
zytariuk
Regular Member
Posts: 947
Joined: January 19th, 2002, 2:01 am
Location: Barrie, Ontario, Canada
Contact:

GROUND CONTROL Coilover kit (Question)

Post by zytariuk »

Ok, im confused. I'm looking at the GROUND CONTROL Coilover kit for my mx-3 GS over at corksport.com and im so confused.<p>- I have to buy two sets of these coilovers right? One set for the front $399 and one set for the back $399...right?<p>Any help would be greatly appreciated!! Thanks
<img src="http://members.rogers.com/zytariuk/images/mx-3.gif" alt=" - " />

1992 Mazda Mx-3 GS - Beige metallic
zytariuk's mx-3 page (updated June 12th, 2003)
pelado
Regular Member
Posts: 1179
Joined: August 27th, 2001, 2:01 am
Location: Russellville, AR, USA

Re: GROUND CONTROL Coilover kit (Question)

Post by pelado »

One set covers all four.
KLZE, ZE PCM, UR pulley, PS catback, PS STS, PRM, IAC bypass, 64mm TB, FOP hair gel
EBUCKS
Regular Member
Posts: 587
Joined: July 19th, 2002, 2:01 am
Location: Toronto
Contact:

Re: GROUND CONTROL Coilover kit (Question)

Post by EBUCKS »

What's up Steve,
I've got my 'guy' working on it. It's just one set of four bud. You might be getting confused with the different spring rates. The springs are stiffer in the front than the back. But it's the same set.
I should have an answer for you this afternoon! :cool: <p>one
zytariuk
Regular Member
Posts: 947
Joined: January 19th, 2002, 2:01 am
Location: Barrie, Ontario, Canada
Contact:

Re: GROUND CONTROL Coilover kit (Question)

Post by zytariuk »

great thanks! Check your email to Ebucks, i sent you an email a few days ago but you didn't respond.
<img src="http://members.rogers.com/zytariuk/images/mx-3.gif" alt=" - " />

1992 Mazda Mx-3 GS - Beige metallic
zytariuk's mx-3 page (updated June 12th, 2003)
Post Reply

Return to “Suspension/Brakes/Wheels/Tires”