Help Please :D

A Forum For All Forced Induction Systems Topics Such As Turbos, Superchargers and Nitrous Oxide.
Post Reply
Got MX-3?
Junior Member
Posts: 11
Joined: December 21st, 2002, 2:01 am
Location: Venice, FL

Help Please :D

Post by Got MX-3? »

Well i seriously wanna turbo my K-8, Im gonna use a T3 ... what intercooler do i use? what pipes? anyone know were i can get intstructions? i wanna do this and ill do it fast... just need to know what EVERYTHING i need to get :D :D
VizualXTC
Regular Member
Posts: 1833
Joined: June 25th, 2001, 2:01 am
Location: Ogden, UT, USA

Re: Help Please :D

Post by VizualXTC »

You don't really NEED an intercooler but it is recomended. First you gotta tell us how much you wanna spend. You can get an i/c from a Starion for about $100 from ebay. You can get smaller ones also. I'd suggest about 2.5" piping, and exhaust. Before you turbocharge your car you should get some literature on it. Most concider "Maximum Boost" by Corky Bell, to be the bible of turbocharging. There are also equasions that will tell you the optimal piping size, intercooler sixe, ect. for a certain application, and that book has them in there. It's good information.
~Ryan~

1994 MX-3 GS Teal
Stock V6 with insane potential
1987 Toyota Pickup
SR5 Xtracab Turbo

--The slow wait until the green light, while the FAST already left when the red went out--

--Sex should be like driving a Honda....slow, obscene, and loud enough for the neighbors to hear--
ImageImage
User avatar
Buff1110
Supporting Member
Posts: 588
Joined: February 26th, 2001, 2:01 am
Location: Howell, NJ, USA

Re: Help Please :D

Post by Buff1110 »

its not something ur gonna do in a few hours, you really need to research bc configuring everything is a main concern. get maximum boost and read that. also the most difficult thing is the manifold bc there isnt one available, u must modify ur stock headers. and u need to watch ur fuel pressure bc ur gonna run lean so get a fpr and upgrade the fuel pump.
research and take ur time b4 u jump into this
Dan
92 Mx-3 Gs, KLZE Powered!! - SOLD!!!!
02 Tacoma TRD - Daily
93 Honda del Sol - New Project
VizualXTC
Regular Member
Posts: 1833
Joined: June 25th, 2001, 2:01 am
Location: Ogden, UT, USA

Re: Help Please :D

Post by VizualXTC »

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Buff1110:
its not something ur gonna do in a few hours, you really need to research bc configuring everything is a main concern. get maximum boost and read that. also the most difficult thing is the manifold bc there isnt one available, u must modify ur stock headers. and u need to watch ur fuel pressure bc ur gonna run lean so get a fpr and upgrade the fuel pump.
research and take ur time b4 u jump into this
<hr></blockquote><p>you don't have to modify the headers because you're not hooking the turbo to them. You have to run pipe from the headers to a collector that will be fitted with a t3 flange. That is where the wastegate will be also. But yes, lots of research is needed for a successful turbo setup.
~Ryan~

1994 MX-3 GS Teal
Stock V6 with insane potential
1987 Toyota Pickup
SR5 Xtracab Turbo

--The slow wait until the green light, while the FAST already left when the red went out--

--Sex should be like driving a Honda....slow, obscene, and loud enough for the neighbors to hear--
ImageImage
Post Reply

Return to “Forced Induction”