Question for Cjthor/Boostedmx

[Shady469]

First off; sup man?<BR>Aight the Q's:CJTHOR: I've got a 92 SOHC and after i get some exhaust work done I plan on adding NOS brand nitrous. How easy was yours to install? And when it's talkin WOT is it saying when i have it floored or what? b/c generally except when shifting i have it floored (yes, on the track Moderators) which im pretty sure will cause needless engine wear if that is the case.<BR>BOOSTEDMX: is your wet system MX-3 specific?<BR>how hard was that to install? how much did it cost?<BR>Thanx in advance?

[boostedmx]

the wet system is not mx3 specific. it is a pro race fogger kit designed to work with all 4cyl. and rotories. the install was not that bad. intake manifold has to come off and hard lines have to be plumbed. getting a digital camera soon so pics will be posted. hope this helps <P>cost is around $600<p>[ December 14, 2001: Message edited by: boostedmx ]

[Shady469]

was it easy enough that you could do it or did you have to take it to a shop?

[boostedmx]

i am a technician so all my work is done by myself. it wasn't hard at all, its basically like doing a intake manifold gasket job with just a little more work while the intake is out of the car. you will have to drill holes in the manifold for the fogger nozzles and plumb the hard lines. if u do this job i recommend getting flexible feed lines to the nozzles. this will make the install alot easier not to mention cleaner looking

[cjthor]

The hardest part on mine was fabbing the bracket to mount the bottle. Other than that it was pretty simple. If you have basic automotive skills you can install this kit. Two solenoids, one relay and some lines. You also have to drill a hole in the air intake..pretty easy though...