Interior Door Panels

A forum for Appearance Discussions. (Exterior, Body Kits, & Interior)
Post Reply
Bigred
Junior Member
Posts: 21
Joined: April 23rd, 2004, 2:01 am
Location: Brantford Ontario

Interior Door Panels

Post by Bigred »

How hard is it to remove the interior door panels on the 95 mx3 front and back.
Mine are going in to be done tomorrow and im always worried about someone breaking any clips or scratching my door panels.
please help
User avatar
MX3-Freak
Regular Member
Posts: 955
Joined: November 8th, 2003, 2:01 am
Location: Gig Harbor Washington
Contact:

Re: Interior Door Panels

Post by MX3-Freak »

Extremely easy. 3-5 screws and gently pull it off.
Stock 1995 RS - Creek Blue
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
killerpickle
Regular Member
Posts: 733
Joined: January 16th, 2001, 2:01 am
Location: Niagara Falls, Canada
Contact:

Re: Interior Door Panels

Post by killerpickle »

though I would expect to break at least 1 or 2 plastic snaps. There cheap to replace though.
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
User avatar
TekPmp
Regular Member
Posts: 208
Joined: March 17th, 2004, 2:01 am
Location: Long Island, Ny

Re: Interior Door Panels

Post by TekPmp »

I always wondered if one could buy all those plastic snaps and "spread pins" .....everytime I remove an interior piece I wind up with less than I started with :confused2:


About removing rear side panels: I suggest removing the trunk side panels before removing rear side panels. Once you remove your trunk panels its only a matter of popping one of those plastic push pins up top near your rear strut tower.
Black 94 RS, Erebuni MS style front, OEM sideskirts, Clear signals, altezza tails, 93 seats, Civic projectors
Post Reply

Return to “Appearance”