4 point harnesses
-
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
4 point harnesses
I FINALLY got my 4 pnt. harnesses that I ordered off ebay back in the beginning of October.
They were very cheap (shipping was insanely expensive however)
generic brand (thank God because I so very badly HATE logos on my stuff)
anyway here's the review.
A harness is a harness is a harness. They are 100% no different than any other harness I have seen with the exception that there is no tacky logo on them and the buckle release button says PRESS very boldly just in case you can't figure it out. mounting points are very secure, and the adjusting points are very sturdy looking.
Thumbs up
<small>[ December 09, 2003, 06:34 PM: Message edited by: Darren Hyderman ]</small>
They were very cheap (shipping was insanely expensive however)
generic brand (thank God because I so very badly HATE logos on my stuff)
anyway here's the review.
A harness is a harness is a harness. They are 100% no different than any other harness I have seen with the exception that there is no tacky logo on them and the buckle release button says PRESS very boldly just in case you can't figure it out. mounting points are very secure, and the adjusting points are very sturdy looking.
Thumbs up
<small>[ December 09, 2003, 06:34 PM: Message edited by: Darren Hyderman ]</small>
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
-
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: 4 point harnesses
Pics? :p
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
-
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: 4 point harnesses
To post pictures on here open the picture you want to post right click on it and select properties. Then copy and paste the URL. Then use the image button on here when you go to post it. Try it, it works.
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
-
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: 4 point harnesses
<img src="http://images.cardomain.com/member_imag ... 9_full.jpg" alt=" - " />
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
-
- Regular Member
- Posts: 140
- Joined: October 30th, 2003, 2:01 am
- Location: Pennsylvania
Re: 4 point harnesses
how much did u pay 4 them?
-
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: 4 point harnesses
$10 for pair (2 seats)
Shipping was $18 + $5 insurance.
Shipping was $18 + $5 insurance.
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
Re: 4 point harnesses
Do you have to have aftermarket racing seats put in to be able to use these effectively, or is there some way adapt them to the stock 92-93 seats?
-
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: 4 point harnesses
I'd suggest having at least seats with slots for the sholder straps to feed through. you don't want them sliding down the sides of the seat
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
-
- Supporting Member
- Posts: 338
- Joined: June 9th, 2003, 2:01 am
- Location: Quebec
- Contact:
Re: 4 point harnesses
nice Darren!
I harassed them for weeks
now they shipped it last week after over a month since they had my payment
I have a UPS tracking # and they are gonna be delivered here by today or tomorrow...
did they wrote a low value for customs or you had to pay 30$ of customs and brokerage? I am sure they didnt...
their customer service suck big time
I harassed them for weeks
now they shipped it last week after over a month since they had my payment
I have a UPS tracking # and they are gonna be delivered here by today or tomorrow...
did they wrote a low value for customs or you had to pay 30$ of customs and brokerage? I am sure they didnt...
their customer service suck big time
-
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: 4 point harnesses
I disagree......even though shipping took forever their customer service was great.
They answered my questions, they reassured me the order was on its way, they were sympathetic, they were polite, that's customer service if you ask me.
I paid ZERO. My parcel arrived I signed for it and that's all. no customs, no brokerage
They answered my questions, they reassured me the order was on its way, they were sympathetic, they were polite, that's customer service if you ask me.
I paid ZERO. My parcel arrived I signed for it and that's all. no customs, no brokerage
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: 4 point harnesses
i like the simple look of the harness and release button. true i dont like any flashy logos on most things unless its a mazdaspeed or mazda logo. to be super safe and to keep your wife safe (you're married right? congrats!), you should really put a beating to those harnesses and see how really durable and strong they are.. just to be on the safe side.
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
-
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: 4 point harnesses
THANKSOriginally posted by marshmallow15:
to be super safe and to keep your wife safe (you're married right? congrats!),
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."