NEED PICS OF A RED MX3 WITH THE BRA..PLEASEEEEEEEEEE
NEED PICS OF A RED MX3 WITH THE BRA..PLEASEEEEEEEEEE
Please i need to know how the Bra its Gonna Look on My MX3 Before BUY IT THANKSS
-
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
Re: NEED PICS OF A RED MX3 WITH THE BRA..PLEASEEEEEEEEEE
my honest opinion is that, the bra does not fit good. Maybe mine was too old...I dont know, it just looked kinda funny...the downside is that you get lots of rock chips...
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
-
- Regular Member
- Posts: 44
- Joined: July 16th, 2003, 2:01 am
- Location: georgetown ontario
Re: NEED PICS OF A RED MX3 WITH THE BRA..PLEASEEEEEEEEEE
man just get the bra. How much you paying? i just got one, looks fine to me. saves me from the rock chips. just put the hood bra on if you don't want both the hood and bumper bra on. just protect your car from the rocks. peace
Re: NEED PICS OF A RED MX3 WITH THE BRA..PLEASEEEEEEEEEE
If the paint is still good, or you get it redone put on a 3m invisible bra. It's just a clear adhesive cut to shape for the car that eliminates stonechips. Plus you can only see the seams if you're lookin for them.
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: NEED PICS OF A RED MX3 WITH THE BRA..PLEASEEEEEEEEEE
check mine, its got a bra to cover small problems with the front
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy