A forum for Appearance Discussions. (Exterior, Body Kits, & Interior)
xXx_OTEP_xXx
Regular Member
Posts: 583 Joined: September 16th, 2002, 2:01 am
Location: Hartford, CT
Post
by xXx_OTEP_xXx » February 17th, 2003, 5:42 pm
I'm wondering if anyone has any of these small aluminum wings on their mx-3.. i think it might look kinda good.. the bigger ones are just too big :p <p>
<p>
<p>Could anyone photoshop this onto an MX-3 if they have any extra time? I would love to see it.. I have a red RS that im considering for one..<p>or this one:
<p>thanks,
Dean
Sold my 95 RS "Little Peanut" but she will never be forgotten.
Paragon
Regular Member
Posts: 677 Joined: July 31st, 2002, 2:01 am
Location: Conowingo, MD
Contact:
Post
by Paragon » February 17th, 2003, 5:55 pm
i know someone does, just can't remember their name...it's on a white car, and it looks pretty good...i'll try to find out who it is for you
xXx_OTEP_xXx
Regular Member
Posts: 583 Joined: September 16th, 2002, 2:01 am
Location: Hartford, CT
Post
by xXx_OTEP_xXx » February 17th, 2003, 7:43 pm
thx man, IM me on AIM if u want, im always on<p>my sn is xXxOTEPxXx
Sold my 95 RS "Little Peanut" but she will never be forgotten.
Juddd_83
Regular Member
Posts: 217 Joined: March 28th, 2002, 2:01 am
Location: Niagara Falls
Contact:
Post
by Juddd_83 » February 17th, 2003, 8:20 pm
I think its Canadian_Ice that has one on this board
---------------------------
Finally a fellow MX-3er!!!!
Euro Tails (Clear Lense)
OEM RS Spoiler
Indiglo Guages
5000V Blue Ground Effects
---------------------------
Juddd_83
Regular Member
Posts: 217 Joined: March 28th, 2002, 2:01 am
Location: Niagara Falls
Contact:
Post
by Juddd_83 » February 17th, 2003, 8:22 pm
Yes it was check out his cardomain page<p>
http://www.sounddomain.com/id/canadian_ice
---------------------------
Finally a fellow MX-3er!!!!
Euro Tails (Clear Lense)
OEM RS Spoiler
Indiglo Guages
5000V Blue Ground Effects
---------------------------
xXx_OTEP_xXx
Regular Member
Posts: 583 Joined: September 16th, 2002, 2:01 am
Location: Hartford, CT
Post
by xXx_OTEP_xXx » February 17th, 2003, 8:43 pm
<p>looks pretty good to me, what do you guys think
Sold my 95 RS "Little Peanut" but she will never be forgotten.
laboiler
Regular Member
Posts: 94 Joined: January 26th, 2003, 2:01 am
Location: Nova Scotia
Post
by laboiler » February 17th, 2003, 9:03 pm
I just emailed you a pic, it's not photoshop but the real thing.It's big so may not be for everyone, I think the low wing will stick out the back too far./ The high wing does not interfere with the rearview mirror at all so you may have that problem also...
...does not play well with others.
xXx_OTEP_xXx
Regular Member
Posts: 583 Joined: September 16th, 2002, 2:01 am
Location: Hartford, CT
Post
by xXx_OTEP_xXx » February 17th, 2003, 10:33 pm
here is rob's car:<p>
<p>I like it, but the wing is too big in my opinion. I like the way they look from that angle, but from the side and back they're just huge and don't look good (to me). That's why I'd like a smaller one... Thx for the pic tho<p>[ February 17, 2003: Message edited by: xXx_OTEP_xXx ]</p>
Sold my 95 RS "Little Peanut" but she will never be forgotten.
mattster
Regular Member
Posts: 459 Joined: August 5th, 2001, 2:01 am
Location: Lynden, WA
Contact:
Post
by mattster » February 17th, 2003, 11:13 pm
personally not a real fan of aluminum spoilers, but those pictures do make them look somewhat good.
92 Mazda MX-3 GS: blaze red, bone stock, and daily driver
86 RX-7 GXL: '94 LT1 V8, 6 speed tranny, scary fast. SOLD
93 Mazda RX7 R1 LS1/6speed... 75% complete
http://www.cardomain.com/id/mattsterrx7 " onclick="window.open(this.href);return false;
^link to my V8 swap page
pickinganame
Regular Member
Posts: 148 Joined: June 10th, 2002, 2:01 am
Location: columbus
Contact:
Post
by pickinganame » February 18th, 2003, 9:46 am
i got one one mine but not that one.mine has a 2 sides on it and it sits a little higher and i love it so has soon as i get a pic then you all can see my car soon
xXx_OTEP_xXx
Regular Member
Posts: 583 Joined: September 16th, 2002, 2:01 am
Location: Hartford, CT
Post
by xXx_OTEP_xXx » February 18th, 2003, 10:27 am
Matt, how did you do you intake like that? is that home depot special? looks kinda good..!<p>Nice tail lights too man
Sold my 95 RS "Little Peanut" but she will never be forgotten.
mazda20
Regular Member
Posts: 550 Joined: November 4th, 2001, 2:01 am
Location: San Antonio, Tx
Contact:
Post
by mazda20 » February 18th, 2003, 11:33 am
This pic was taken along time ago, since then I had it raised a little.<p>
94 Mazda MX-3 BPT Custom Intake/Exhaust T3/T4, 51mm BOV, Tial WG, 2.5" Piping, 880cc Inj, Godspeed Intercooler, TEC II
My MX-3 Website
992mmx3
Regular Member
Posts: 1338 Joined: October 24th, 2002, 2:01 am
Location: Federal Way, WA
Post
by 992mmx3 » February 18th, 2003, 12:38 pm
I've got one thats about the same size as the mazdamaniacs, his looks killer, his whole car looks killer.
-Mark Lathrop
1992 MX-3 RS-T
B6T with some goodies
"...I told those fudgepackers I liked Michael Bolton's music..."
zytariuk
Regular Member
Posts: 947 Joined: January 19th, 2002, 2:01 am
Location: Barrie, Ontario, Canada
Contact:
Post
by zytariuk » February 18th, 2003, 1:36 pm
Im sorry but aluminum wings on Mx-3's are just gay.
mx3_guy
Regular Member
Posts: 115 Joined: November 20th, 2002, 2:01 am
Location: Newfoundland
Contact:
Post
by mx3_guy » February 18th, 2003, 8:31 pm
yeah, aluminum wings and the mx3 just dont go right, theres not enough room after the hatch to make it work, it looks prety gay (no offense to anyone who got one) thats just my opinion