Qs on indiglo gauge face

[singsingevil]

i m sorry if i put this in wrong section, but i just wana see if there is any maunals on how to put on the gauge face cuz i dun wana put it on without knowing exactly what it is ... thz

[Mastirmynd]

The ones i have came with a crappy little piece of paper that didnt help, try Jeff Abrams site <A HREF="http://www.mazdamaniac.com/" TARGET=_blank>mazdamaniac.com</A> Thats where i got a lot of my info. That and some other board members helped out a great deal.

[tivo0131]

i did a search on the topic before it came in the mail. you can try that but when it came i was able to follow the instuctions pretty easy. Just a little hint DO NOT break the needle, do everything in your power not to break it it will be a pain to fix. also what i found was its easier to bend the gauges a little to make it fit around the needles good luck!!!!

[millionflame]

The Speedhut ones I have I just layed over top of my existing faces in order to keep those needles at zero. It pretty darn hard to break the gauge needles I find. I was playing with them TRYING to break them almost, and I couldn't unless I took ttwo hands and snapped them. They bend easily with a lot of play.<P>Wire the things into the red wire going INTO the dimmer switch, or one of the 18AWG wired comming from the battery into the interrior fuse box.<P>Hope this helps.<BR>~A

[singsingevil]

Thz guys for ur helps ^^<BR>I decided to do the mod in thanksgiving break so I can read through the manual thoroughly online. <BR>But here is another problem.. the gauge I have now, it has a switch that can change color and brightness, and its size is the same as the power mirror switch (a bit bigger mayb). where should i put it on? any experiences or ideas?<BR>thz ppl~ ^^

[monty73741]

what year is your mx-3<BR>also their is a pdf file of the installation on the site somewhere<BR>jason

[Mastirmynd]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by singsingevil:<BR><STRONG>Thz guys for ur helps ^^<BR>I decided to do the mod in thanksgiving break so I can read through the manual thoroughly online. <BR>But here is another problem.. the gauge I have now, it has a switch that can change color and brightness, and its size is the same as the power mirror switch (a bit bigger mayb). where should i put it on? any experiences or ideas?<BR>thz ppl~ ^^</STRONG><HR></BLOCKQUOTE><P>I just mounted mine Right under the Defroster and hazzard light buttons. Couple of screws and it was done. Doesnt look too clean, but im working on another one of those gauge, dash, plastic arround the cluster, things, One that will fit the switches for the gauges, strobes, neons, and seat heater switches.