PICTURE from ONDERGROUND - mp-5 -) mx-3

A forum for Appearance Discussions. (Exterior, Body Kits, & Interior)
onderground
Regular Member
Posts: 77
Joined: September 7th, 2002, 2:01 am
Location: Montreal Canada

PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by onderground »

OK first I need to tell you, this is NOT what you will get, of course... just the top have been touched..<P>ok heres the deal...<P>the red line in picture is the LIMIT where we can go...<BR>the plastic bumper reeinforcement in your mx-3 is pretty short, this mean, the opening for the grill is not enough big in height, we cannot go lower than in the picture...<P>we have 2 options, raise the 2 side of the opening, to give the V effect... or leave it like that for bigger opening....<P>We cannot go lower, cuz your stock plastic bumper reiinforcement is there and we dont want to cut anything off your car!... for safety!<P>you may choose.... <P>V effect, with small opening, <P> Image <P>or flat opening<P> Image <P> Image<p>[ October 07, 2002: Message edited by: onderground-design ]
User avatar
Andrew_Pakula
Senior Member
Posts: 2362
Joined: November 18th, 2000, 2:01 am
Location: Toronto, Ontario, Canada
Contact:

Re: PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by Andrew_Pakula »

I think it would look fine with the flat opening.
Guest

Re: PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by Guest »

ya i think the flat looks alright too, took me a sec to tell what i was looking at":P but ya its looking good so far. I say keep her flat.
maldo
Regular Member
Posts: 1333
Joined: December 11th, 2000, 2:01 am
Location: Saskatoon, SK, Canada

Re: PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by maldo »

Keep it flat
QPDZARO
Junior Member
Posts: 27
Joined: March 3rd, 2002, 2:01 am
Location: North Bay CALIFORNIA

Re: PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by QPDZARO »

You know I am not there to see this project first hand but I think that the "V" would Probably look better... Just an opinion.. <P>But Count me in for either of the Two that you guys decide to make, I got the money and It is gonna be awsome !!!! <P>(Thanks to MAZDA MX-3.com, and friends I dont have to have a stock car, and dont have to get a honda to get body kits and parts )
onderground
Regular Member
Posts: 77
Joined: September 7th, 2002, 2:01 am
Location: Montreal Canada

Re: PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by onderground »

like oscar suggested, we will probably do a light light v design...
User avatar
Custommx3
Site Administrator
Posts: 8391
Joined: November 7th, 2000, 2:01 am
antispam: ~SPAM*SUX~
Location: Lat 35.1N Lon -90W
Contact:

Re: PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by Custommx3 »

I like the "V" myself. It seems to keep the new style of Mazda. MOst of the bumpers now have big openings. Lets go with the "V"
User avatar
cjthor
Forum Moderator
Posts: 5018
Joined: November 26th, 2000, 2:01 am
Location: Portland Oregon
Contact:

Re: PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by cjthor »

I'm thinkin a tad on the V side. Nothin too extreme.. Just a light v if ya catch my drift.
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Re: PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by EZ_4_FUN »

I'm feeling the "light V " shape<P>almost U shaped [img]shrug.gif"%20border="0[/img]
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
Guest

Re: PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by Guest »

ya a light v would be ok, not what they have up there, it losses to much of the opening, but yes a light v would look nice.
Guest

Re: PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by Guest »

ok go to this link and click the pic on the right under mp5 bumper progress. and if someone could post the pic up here that would be great.<A HREF="http://www.geocities.com/sureshot2012/pictures.htm" TARGET=_blank>A light-v comparison, i like how the v looks!</A>
User avatar
Wildman640
Regular Member
Posts: 550
Joined: January 15th, 2002, 2:01 am
Location: Sumerco, West Virginia

Re: PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by Wildman640 »

hope this worked<P> Image<p>[ October 07, 2002: Message edited by: Ronnie ]
User avatar
hotsiit
Supporting Member
Posts: 1078
Joined: March 4th, 2001, 2:01 am
Location: Allentown, PA
Contact:

Re: PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by hotsiit »

hey all...i like the idea of the "light V"...but either way it looks fine to me...just my opinion, keep up the good work...later,
Chris--It's HOTNESS, you wouldn't understand! -- Donate to MX-3.com--It'll make you feel good!
http://www.cardomain.com/id/colonelsmx3
1993 Mazda MX-3 RS-Turbo
1993 Mazda RX-7 touring
1983 Mazda RX-7 GSL
1995 Subaru Impreza L AWD Sedan
1987 Jeep Comanche
Image
LiL-LaW
Regular Member
Posts: 400
Joined: October 1st, 2002, 2:01 am
Location: Bowmanville, ON
Contact:

Re: PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by LiL-LaW »

I personally like the light-v look now that I have seen it on a car hehe it was hard to invision at first
2.5mx3
Regular Member
Posts: 563
Joined: July 9th, 2001, 2:01 am
Location: Baltimore, MD, USA

Re: PICTURE from ONDERGROUND - mp-5 -) mx-3

Post by 2.5mx3 »

Yes, keep the light "v" in there! It looks more like the P5, but still maintains an original look.
Hank
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring

--All those who wander are not lost-- JRR Tolkien
Post Reply

Return to “Appearance”