corksport bumper

General Mazda MX-3 Discussions
Post Reply
RayRay
Regular Member
Posts: 510
Joined: January 29th, 2001, 2:01 am
Location: Edison, NJ

corksport bumper

Post by RayRay »

I recently bought a corksport Mazdaspeed style bumper. I think that it's a real piece of crap. The body shop specialist who's installing ran into several problems mounting that piece of shat onto my car. He had to cut off part of the lower grill area to be able to fit it on the car flush. Then another problem came up. When the bumper was flush onto the car, there's a 1 inch gap between the headlights and the top of the bumper. Sorry about the length of this but i had to let everyone know that the MS style bumper is a real piece of shat. <P>------------------<BR>
2005 Nissan 350z
1990 Mustang GT - [sold]
1992 Mx-3 GS - [sold]
Potatoes
Regular Member
Posts: 61
Joined: May 29th, 2001, 2:01 am
Location: Toronto

Re: corksport bumper

Post by Potatoes »

Hey thanks for your comments! I wonder what others think? I was planning to get that too... but didn't know that it was that much problem to put it on!<BR>
RayRay
Regular Member
Posts: 510
Joined: January 29th, 2001, 2:01 am
Location: Edison, NJ

Re: corksport bumper

Post by RayRay »

i talked to derrick at corksport about my situation. i said that i already modified the bumper to fit and that it was still way off. he said he wants to help me out and that i should take a picture and email him. he was really nice about it. i thought that he would be tell me to go away since i already modified the bumper, but he didn't. all in all, good service but bad product. i hope this helps you.
2005 Nissan 350z
1990 Mustang GT - [sold]
1992 Mx-3 GS - [sold]
Brainless
Regular Member
Posts: 843
Joined: December 31st, 2000, 2:01 am
Location: Sherbrooke, Québec, Canada
Contact:

Re: corksport bumper

Post by Brainless »

are you talking about the imitation of the mazdaspeed bumper?<P>------------------<BR>Brainless<BR>93 red RS
Jonathan Michaud
93 Red RS
User avatar
Custommx3
Site Administrator
Posts: 8391
Joined: November 7th, 2000, 2:01 am
antispam: ~SPAM*SUX~
Location: Lat 35.1N Lon -90W
Contact:

Re: corksport bumper

Post by Custommx3 »

Mine was as well..<BR>Mine has about a 1/2 inch gap by the headlights, also. the passenger side front section has a small wave in the side. not real noticeable, but I notice it.<BR>Pissed me off.. plus my side makers didnt fit.. I had to cut some of the inside of the bumper out. I emailed him about it, about 5 months ago. I never recieved a response. I said screw it. I cant send my bumper back , after I've had it 80% on my car. So I just left it on.<BR><P>------------------<BR>Barry Clark<BR><I><B>Moderator</B></I><BR>1995 Mazda Mx-3 RS<BR>Chaste White<BR><A HREF="http://www.barrykclark.com" TARGET=_blank>barrykclark.com</A> <BR> custommx3@usa.net
RayRay
Regular Member
Posts: 510
Joined: January 29th, 2001, 2:01 am
Location: Edison, NJ

Re: corksport bumper

Post by RayRay »

Barry, what kind of fog lights did you put on to your bumper and how much did they cost? And what did you use for your grill?
2005 Nissan 350z
1990 Mustang GT - [sold]
1992 Mx-3 GS - [sold]
rikymaru
Regular Member
Posts: 202
Joined: March 4th, 2001, 2:01 am
Location: Florida, US of A

Re: corksport bumper

Post by rikymaru »

DAMMIT....I got this topic 1 month late.<P>Yep. I have one too. And its a piece of ****. It's really not the quality of the bumper, its the fact that you have to modify the hell out of it to fit the car (and all MX3's have the same front bumper...why the hell should I have to modify it?) If anyone wants to buy one, here is a list of problems you'll run into:<P>The sidemarker arent even in the bumper.<P>You have to cut the light housing part in the bumper.<P>The stock grill will not fit (the one on top.)<P>Basically, your looking at many modifications for a part that shouldnt need it. On another note...<P>THE SIDE SKIRTS SUCK TOO!<P>They are so bad I have yet to get them on my car. THey have to be molded, and you have to cut the door clip off to get it to fit.<P>God...I wish I saved another $100 and went with the FX Designs kit.....
Elena, don't misunderstand. A pro isn't someone who sacrifices themselves for their job. That is just a fool.
RayRay
Regular Member
Posts: 510
Joined: January 29th, 2001, 2:01 am
Location: Edison, NJ

Re: corksport bumper

Post by RayRay »

okay, it seems like the corksport Mazdaspeed style bumper and sideskirts are causing everyone trouble. IT'S A PIECE OF SHAT. DON'T BUY IT. sure it looks like a bargain compared to the real Mazdaspeed ones, but they're a piece of shat.
2005 Nissan 350z
1990 Mustang GT - [sold]
1992 Mx-3 GS - [sold]
User avatar
Custommx3
Site Administrator
Posts: 8391
Joined: November 7th, 2000, 2:01 am
antispam: ~SPAM*SUX~
Location: Lat 35.1N Lon -90W
Contact:

Re: corksport bumper

Post by Custommx3 »

I was waiting on this.. <BR>My grill was made from a material used in industrial air filters, My friends parents own a company that makes the filters and they gave me some scrap pieces. My fog lights are cheap.. they are made by Blazer, same ones a PILOT makes. I got them for about 50 bucks @ wal-mart. I made custom brackets to mount them.<P>As to the remark about the side markers. The mazdaspeed doesnt come with them. The mazdaspeed one comes with grills to replace the stock one. I knew this before I bought it. BTW the FX bodykit is just as bad of quality. Most of them do not mount up flush with the hood, and the front has to be re-enforced or it will break.<P>------------------<BR>Barry Clark<BR><I><B>Moderator</B></I><BR>1995 Mazda Mx-3 RS<BR>Chaste White<BR><A HREF="http://www.barrykclark.com" TARGET=_blank>barrykclark.com</A> <BR> custommx3@usa.net <p>[This message has been edited by Custommx3 (edited June 05, 2001).]
User avatar
cjthor
Forum Moderator
Posts: 5018
Joined: November 26th, 2000, 2:01 am
Location: Portland Oregon
Contact:

Re: corksport bumper

Post by cjthor »

Hey guys.. In corksports defense...I have personally bought like four or five things from them. I have had a few problems but Derrick and one of the other guys, I think it was like Ben or something, were totally great! They resent stuff and really helped out. One of the only places for our cars...Well thats my two cents...<P><BR> Jarid Perry<BR> 94 Blaze red RS<BR> 15.05@96.7mph
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
RayRay
Regular Member
Posts: 510
Joined: January 29th, 2001, 2:01 am
Location: Edison, NJ

Re: corksport bumper

Post by RayRay »

I don't know if anyone noticed what I posted before, I said "bad product, but good service". I talked to Derrick and he said to take a couple pictures of the bumper on the car and he'd help me out. I don't have a problem with corksport, Derrick and everyone are great, its just that the quality of the bumper is real horrible.
2005 Nissan 350z
1990 Mustang GT - [sold]
1992 Mx-3 GS - [sold]
Post Reply

Return to “General Mazda MX-3”