Crome inner door handles

Maddbuck · Post by **Maddbuck** » June 20th, 2002, 11:31 am

I've seen them on a MX-3 on someones website from this board. Anyways I wanna get some to match my new sills and I found a website that sells them for a MX-5. They look identicle in the pictures to what the MX-3 has. The problem is they come in 2 versions one for the 1999/2000 MX-5 and the other for the 2001+ MX-5. I honestly don't think they would be different but you never know. I emailed and got a reply saying the mechanisms where different.Who has bought these and put them on their MX-3 and which version did you buy?thanx

Post by **Custommx3** » June 20th, 2002, 12:40 pm

where is the website?Toms S has them in his, he said something about the special edition miata if I heard correctly.

Maddbuck · Post by **Maddbuck** » June 20th, 2002, 4:37 pm

Barry, here is the web site : <A HREF="http://www.miata.org/cmt/bsp/" TARGET=_blank>http://www.miata.org/cmt/bsp/</A> click interior then click metal/crome link.there are a few other sites but I don't have them bookmarked right now, was Tom S at carlise? I remember seeing the handles on an emerald green MX-3 but can't remember if it was on his website or in person.

Buff1110 · Post by **Buff1110** » June 21st, 2002, 1:29 am

can u post the part # bc im interested in puttinng them in my car as well Dan

Sinistral · Post by **Sinistral** » June 21st, 2002, 9:40 am

How much?? Cuz mazda part are very expensive..

Maddbuck · Post by **Maddbuck** » June 21st, 2002, 12:36 pm

I'm waiting for an email reply from the site I posted above, when I get it I'll let you all know what they said. So far it looks like it may be the 1999/2000 part which cost US$53.60 from the site above but let me get the email to confirm the part numbers and then I'll rush order them to get them in and let you all know which of the two to buy for sure.

Buff1110 · Post by **Buff1110** » June 22nd, 2002, 1:13 am

sounds good, thanx Dan

nicolasbeique · Post by **nicolasbeique** » June 27th, 2002, 5:43 am

So does anyone know if its the 1999-2000 or 2000+ that work on the mx-3????

precidian · Post by **precidian** » June 27th, 2002, 9:29 am

any of the 2nd generation Miata handles will work.cheers,

Maddbuck · Post by **Maddbuck** » June 27th, 2002, 2:12 pm

I bought the 1999-2000 and they arrive today so I'll post again tonight about my install and if they fit.

Maddbuck · Post by **Maddbuck** » June 27th, 2002, 10:41 pm

OK the 1999-2000 handles from the site above fit fine. There was one slight thing I had to do and that was use the lock rod clip from the old handles. The bottom rod clip to pull the door lever was identical. They are in and look excellent.

MX-3.com

Crome inner door handles

Crome inner door handles

Re: Crome inner door handles

Re: Crome inner door handles

Re: Crome inner door handles

Re: Crome inner door handles

Re: Crome inner door handles

Re: Crome inner door handles

Re: Crome inner door handles

Re: Crome inner door handles

Re: Crome inner door handles

Re: Crome inner door handles