best clutch

V6 Technical/Performance Discussions
Post Reply
whitemike10601
Junior Member
Posts: 16
Joined: July 11th, 2004, 2:01 am
Location: Richmond, VA

best clutch

Post by whitemike10601 »

my clutch slips too much for the way i drive, i can't even spin tires. its the original clutch from 93 so i'm going to need a new one any way. of the performance clutches out there, which is the best. i still have to drive this car every day but i want the clutch the grab hard

'93 mx-3 se 1.8L v6
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: best clutch

Post by papa roached »

do ya like the feel of a heavy clutch? get a ACT street clutch if you do, but make sure to get the braided steel line from corksport too
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
User avatar
bmwm3guy
Regular Member
Posts: 1066
Joined: March 7th, 2004, 2:01 am
Location: Gatineau, QC
Contact:

Re: best clutch

Post by bmwm3guy »

does the braided steel line make that much of a difference? I have a Centerforce Dual-Friction clutch... would you suggest the steel lines?
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Re: best clutch

Post by babyblueMX3 »

Originally posted by bmwm3guy:
does the braided steel line make that much of a difference? I have a Centerforce Dual-Friction clutch... would you suggest the steel lines?
the SS clutch line did a big difference with my act clutch..I tried it with and without...

without, the car starts to move when the pedal is around 1/2" from the floor..

with..at least 1-1/2"...

I recomande this to everybody that gets an aftermarket clutch..
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
RaverChankoMX3
Regular Member
Posts: 452
Joined: May 15th, 2003, 2:01 am
Location: CLEMSON, SC
Contact:

Re: best clutch

Post by RaverChankoMX3 »

I wonder if there is any quality/installation difference between the SS line at Cork and RR-Racing? I know there is on price!
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: best clutch

Post by papa roached »

i know my CS line fit perfect
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Post Reply

Return to “V6 Technical/Performance”