shall i install it?

V6 Technical/Performance Discussions
Post Reply
User avatar
93-Spec-Edn
Regular Member
Posts: 817
Joined: April 1st, 2003, 2:01 am
Location: alberta, canada

shall i install it?

Post by 93-Spec-Edn »

Hi

I got a k&n filter to drop into my stocl air box for $68cdn brand new. Shall I install it or will it make no difference. Will it change the sound or add any ponies? From searching I can only find info about CAI's or HKS filters.

Thanks
92 mx-3 RS RIP | 95 mx-3 GS sold | 93 mx-3 GS SE sold | 95 mx-3 GS present
lakersfan1
Senior Member
Posts: 3825
Joined: June 26th, 2003, 2:01 am
Location: Puyallup, WA

Re: shall i install it?

Post by lakersfan1 »

I got one mainly because it's impossible to find even a paper element filter in stock anywhere, and even then, it was like $25 U.S. for a cheap one. The K&N can be cleaned out with the cleaning kit.
User avatar
jpwmx3
Regular Member
Posts: 364
Joined: August 8th, 2002, 2:01 am
Location: Waterloo, Canada
Contact:

Re: shall i install it?

Post by jpwmx3 »

ya its definately better than paper. the sound is about the same.
User avatar
93-Spec-Edn
Regular Member
Posts: 817
Joined: April 1st, 2003, 2:01 am
Location: alberta, canada

Re: shall i install it?

Post by 93-Spec-Edn »

Originally posted by lakersfan1:
I got one mainly because it's impossible to find even a paper element filter in stock anywhere, and even then, it was like $25 U.S. for a cheap one. The K&N can be cleaned out with the cleaning kit.
did u notice any difference over stock?
92 mx-3 RS RIP | 95 mx-3 GS sold | 93 mx-3 GS SE sold | 95 mx-3 GS present
lakersfan1
Senior Member
Posts: 3825
Joined: June 26th, 2003, 2:01 am
Location: Puyallup, WA

Re: shall i install it?

Post by lakersfan1 »

Originally posted by Ayaz:
Originally posted by lakersfan1:
I got one mainly because it's impossible to find even a paper element filter in stock anywhere, and even then, it was like $25 U.S. for a cheap one. The K&N can be cleaned out with the cleaning kit.
did u notice any difference over stock?
Not sure. I replaced it when the temperature was like 110 degrees out. Acceleration sucks no matter what in those temperatures. I sure didn't notice a drop, though.
mx3man83
Regular Member
Posts: 1921
Joined: August 25th, 2002, 2:01 am
Location: tucson, az

Re: shall i install it?

Post by mx3man83 »

Well you already bought it right? Just install it.... :shrug:
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
IanL
Supporting Member
Posts: 1394
Joined: June 13th, 2002, 2:01 am
Location: UK

Re: shall i install it?

Post by IanL »

Originally posted by Ayaz:
I got a k&n filter to drop into my stocl air box for $68cdn brand new. Shall I install it or will it make no difference. Will it change the sound or add any ponies?
I found it improved throttle response, and gives a small reduction in fuel consumption. No noticeable noise change.
Re-shaped and re-sized gearshift lever. Best driveability mod you can do!
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system :)
User avatar
93-Spec-Edn
Regular Member
Posts: 817
Joined: April 1st, 2003, 2:01 am
Location: alberta, canada

Re: shall i install it?

Post by 93-Spec-Edn »

Originally posted by IanL:
Originally posted by Ayaz:
I got a k&n filter to drop into my stocl air box for $68cdn brand new. Shall I install it or will it make no difference. Will it change the sound or add any ponies?
I found it improved throttle response, and gives a small reduction in fuel consumption. No noticeable noise change.
Thanks.I guess I will install it.
92 mx-3 RS RIP | 95 mx-3 GS sold | 93 mx-3 GS SE sold | 95 mx-3 GS present
User avatar
93-Spec-Edn
Regular Member
Posts: 817
Joined: April 1st, 2003, 2:01 am
Location: alberta, canada

Re: shall i install it?

Post by 93-Spec-Edn »

Ok its installed but there is a slight hissing at idle..Is this normal?
92 mx-3 RS RIP | 95 mx-3 GS sold | 93 mx-3 GS SE sold | 95 mx-3 GS present
IanL
Supporting Member
Posts: 1394
Joined: June 13th, 2002, 2:01 am
Location: UK

Re: shall i install it?

Post by IanL »

No, not on mine - did you get the airbox fully closed?
Re-shaped and re-sized gearshift lever. Best driveability mod you can do!
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system :)
User avatar
93-Spec-Edn
Regular Member
Posts: 817
Joined: April 1st, 2003, 2:01 am
Location: alberta, canada

Re: shall i install it?

Post by 93-Spec-Edn »

Originally posted by IanL:
No, not on mine - did you get the airbox fully closed?
Yes I am pretty sure its on tight..I removed the whole lid from the throttle body when I installed it.
92 mx-3 RS RIP | 95 mx-3 GS sold | 93 mx-3 GS SE sold | 95 mx-3 GS present
IanL
Supporting Member
Posts: 1394
Joined: June 13th, 2002, 2:01 am
Location: UK

Re: shall i install it?

Post by IanL »

Originally posted by Ayaz:
Originally posted by IanL:
No, not on mine - did you get the airbox fully closed?
Yes I am pretty sure its on tight..I removed the whole lid from the throttle body when I installed it.
Throttle body? Did you mean airbox? The TB is on the front of the inlet manifold.

Maybe the leak was always there, but you hadn't noticed it before. Roll a piece of paper into a tube, about 1/2 inch diameter, put it to your ear and see if you can localise the source.
Re-shaped and re-sized gearshift lever. Best driveability mod you can do!
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system :)
User avatar
93-Spec-Edn
Regular Member
Posts: 817
Joined: April 1st, 2003, 2:01 am
Location: alberta, canada

Re: shall i install it?

Post by 93-Spec-Edn »

Originally posted by IanL:
Originally posted by Ayaz:
Originally posted by IanL:
No, not on mine - did you get the airbox fully closed?
Yes I am pretty sure its on tight..I removed the whole lid from the throttle body when I installed it.
Throttle body? Did you mean airbox? The TB is on the front of the inlet manifold.

Maybe the leak was always there, but you hadn't noticed it before. Roll a piece of paper into a tube, about 1/2 inch diameter, put it to your ear and see if you can localise the source.
Sorry I meant the airbox. I removed the whole thing , even the ribbed rubber tubing from the throttle body. I will try what u suggested. Thanks
92 mx-3 RS RIP | 95 mx-3 GS sold | 93 mx-3 GS SE sold | 95 mx-3 GS present
User avatar
ikarus1
Regular Member
Posts: 134
Joined: March 22nd, 2004, 2:01 am
Location: Charlotte NC USA

Re: shall i install it?

Post by ikarus1 »

You guys should read this about air filters:

http://www.bobistheoilguy.com/airfilter/airtest3.htm
93 White MX-3 "Ebay special"
94 Green 626 V6 5-speed "family car"
94 Mazda B2300 SE "project turbo truk"
perhapsadingo8yerbaby
Regular Member
Posts: 764
Joined: June 16th, 2002, 2:01 am

Re: shall i install it?

Post by perhapsadingo8yerbaby »

Originally posted by J Love:
You guys should read this about air filters:
http://www.bobistheoilguy.com/airfilter/airtest3.htm
Thanks for that link. Always interesting to see a set of real-life road tests conducted with some degree of objectivity. The manufacturers generally seem to tilt the presentation of data to their favor if possible. I'm not surprised at the paper filter vs "all the others" results but was a bit surprised to see that foam filters didn't compare as favorably.
Post Reply

Return to “V6 Technical/Performance”