no horsepower.........

cozmo959 · Post by **cozmo959** » December 2nd, 2003, 5:02 am

i got me jdm ze working and im using a KF-15 ecu and je50 VAF and it feels like i have a lot less power than my K8 i would assum that i would get more power off of the kf-15 ecu than the K8 ecu....but i guess not it feels really weak. i have no CEL and everything seems fine ( compression , timing, new clutch, im using the ZE intake manifold as well. i have intake, headers and exaust)the car is running a little rich. anyone have any ideas??? plz help

Spydie · Post by **Spydie** » December 2nd, 2003, 7:19 am

put you K8 ecu back in and watch what happens

cozmo959 · Post by **cozmo959** » December 2nd, 2003, 8:55 am

i heard that the ecu needs time to configure the settings of the engine. do you know how long that takes? how do u reset the ecu?

timpronk · Post by **timpronk** » December 2nd, 2003, 1:49 pm

If I remember correctly you disconnect your negative battery cable, hold the brake pedal for about 25 seconds. Then reconnect the battery cable and you should be all reset. I imagine there are other ways as well.

cozmo959 · Post by **cozmo959** » December 3rd, 2003, 3:57 am

i found the problem.....i left the jumper in the diagnostics box from when i was adjusting the timing and throttle......everything is good now

MX-3.com

no horsepower.........

no horsepower.........

Re: no horsepower.........

Re: no horsepower.........

Re: no horsepower.........

Re: no horsepower.........