Does anyone know this serial number?
serial number on the block is: KL-461353<p>cannot find anything on this number.<p>thanks
kl-ze serial number
-
- Regular Member
- Posts: 1179
- Joined: August 27th, 2001, 2:01 am
- Location: Russellville, AR, USA
Re: kl-ze serial number
What do you expect us to tell you from the serial number except that it's number 461353??
KLZE, ZE PCM, UR pulley, PS catback, PS STS, PRM, IAC bypass, 64mm TB, FOP hair gel
Re: kl-ze serial number
You could always call mazda. Where did u get the engine?....Ask who ever sold it to you about it, to find out if he has any paperwork on it. ![Shrug :shrug:](./images/smilies/shrug.gif)
![Shrug :shrug:](./images/smilies/shrug.gif)
94 V6 GS Teal
I'm Not C0CKY....Just Perfect
I'm Not C0CKY....Just Perfect
-
- Regular Member
- Posts: 111
- Joined: January 6th, 2003, 2:01 am
- Location: The Netherlands
- Contact:
Re: kl-ze serial number
Well, actually what I wanna know is if this is a KL-ZE serial number.
I bought a engine and to be sure this is the KL-ZE I hoped that somebody recognized the serial number.
I bought a engine and to be sure this is the KL-ZE I hoped that somebody recognized the serial number.
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
-
- Regular Member
- Posts: 1179
- Joined: August 27th, 2001, 2:01 am
- Location: Russellville, AR, USA
Re: kl-ze serial number
You can't tell anything from the serial number.<p>This is from the V-6 FAQs (located in what must be a really hard to find area since no one ever seems to refer to them) courtesy of David Coleman:<p>How to tell a KLZE from a KLDE:
KLZE will have:
-KL31 xxx marked on the heads
-KL01 or KL31 stamped on the camshafts [KL01 for ZE's from Millenias, and KL31 for ZE's from MX-6's]
-Square runners, either curved neck [Millenia] or long straight neck [MX-6] manifold. NOTE: MX-3's can only use the Millenia curved neck manifold, as the MX-6 manifold puts the TB where the master cylinder is.
-No EGR port on the rear exhaust manifold is definately a ZE, though some ZE's have come with EGR.<p>KLDE will have:
-KL xxx marked on the heads.
-KL01 cams
-round runners, short necked manifold<p>
Both can have Ford OR Mazda valve covers. I've also seen a few KLZE's with KLDE intake manifolds on them. The main thing is going to be the head code. That's going to tell you what's inside.
KLZE will have:
-KL31 xxx marked on the heads
-KL01 or KL31 stamped on the camshafts [KL01 for ZE's from Millenias, and KL31 for ZE's from MX-6's]
-Square runners, either curved neck [Millenia] or long straight neck [MX-6] manifold. NOTE: MX-3's can only use the Millenia curved neck manifold, as the MX-6 manifold puts the TB where the master cylinder is.
-No EGR port on the rear exhaust manifold is definately a ZE, though some ZE's have come with EGR.<p>KLDE will have:
-KL xxx marked on the heads.
-KL01 cams
-round runners, short necked manifold<p>
Both can have Ford OR Mazda valve covers. I've also seen a few KLZE's with KLDE intake manifolds on them. The main thing is going to be the head code. That's going to tell you what's inside.
KLZE, ZE PCM, UR pulley, PS catback, PS STS, PRM, IAC bypass, 64mm TB, FOP hair gel
-
- Regular Member
- Posts: 111
- Joined: January 6th, 2003, 2:01 am
- Location: The Netherlands
- Contact:
Re: kl-ze serial number
Ok, that's verry good info.
I have to wait for the engine then.
No other option.
Wish me luck !
The neck is curved so that seems to be good isn't it?
My mx-3 will be the first 2.5 v6 in The Netherlands.
There is a company who wil help me because a good commercial thing for them.<p>[ January 24, 2003: Message edited by: leiden ]</p>
I have to wait for the engine then.
No other option.
Wish me luck !
The neck is curved so that seems to be good isn't it?
My mx-3 will be the first 2.5 v6 in The Netherlands.
There is a company who wil help me because a good commercial thing for them.<p>[ January 24, 2003: Message edited by: leiden ]</p>