ok i installed

MI-Archangel · Post by **MI-Archangel** » October 6th, 2002, 9:48 pm

i put on ym exhasut i clamped my new muffler to the pipe but it boucnes around when i drive how do i secure the muffler so it doesnt bounce

OsoSlo z28 · Post by **OsoSlo z28** » October 6th, 2002, 11:19 pm

weld it.

killerpickle · Post by **killerpickle** » October 7th, 2002, 2:12 pm

isn't there some kind of "no weld" weld crap you can buy?

Guest · Post by **Guest** » October 7th, 2002, 2:41 pm

ive seen shops use a metal band that wraps around and secures the muffler

marshmallow15 · Post by **marshmallow15** » October 7th, 2002, 3:57 pm

<BLOCKQUOTE>quote:<HR>Originally posted by killerpickle: isn't there some kind of "no weld" weld crap you can buy?<HR></BLOCKQUOTE>maybe some type of high-heat silicone or a pvc piping/metal coupling. those things dry up fast. if you use a sleeve to secure the clamps, try putting in strips of a high heat material inside before tightening...it could help too.

5spd_GS · Post by **5spd_GS** » October 7th, 2002, 4:45 pm

Two choices if you are serious about it stopping..1) Weld. there is no better solution2) Get a Metal Strap on there, not half as good as the weld though. i would think if you wanted the muffler to be half funtional, you would want it to muffle its OWN noise before it muffles the exhaust.. LOL

Mareno · Post by **Mareno** » October 7th, 2002, 9:28 pm

I think u should weld it....it would stay on longer...unless ur welding job sucks..

MX-3.com

ok i installed

ok i installed

Re: ok i installed

Re: ok i installed

Re: ok i installed

Re: ok i installed

Re: ok i installed

Re: ok i installed