what should the RPM be at while car in "P"

V6 Technical/Performance Discussions
Post Reply
A.S.
Regular Member
Posts: 198
Joined: October 15th, 2001, 2:01 am
Location: CANADA, eh!

what should the RPM be at while car in "P"

Post by A.S. »

What should the RPM be at while the car is in "P" or "D" while stopped in an auto GS. My RPM is usually at about 300-500 and I get the "CHARGE" light on, but when I gass it and at about 1000 RPM, the light dissapears. I my idle off, should it be set higher??
hi
ggmx3
Junior Member
Posts: 13
Joined: December 21st, 2001, 2:01 am
Location: Colorado, USA

Re: what should the RPM be at while car in "P"

Post by ggmx3 »

The idle speed for the 4 cylinder is 700-800 in park, 640-700 for the 6 cylinder. Sounds like you need to adjust it up.<P>Good luck!
COMPACT Gladiator
Junior Member
Posts: 18
Joined: December 24th, 2001, 2:01 am
Location: Bronx, ny

Re: what should the RPM be at while car in "P"

Post by COMPACT Gladiator »

watch 4 yours belts...and aslo check your altenator. JUST A THOUGH!!
spawn_46375
Junior Member
Posts: 8
Joined: June 26th, 2001, 2:01 am
Location: schererville in usa
Contact:

Re: what should the RPM be at while car in "P"

Post by spawn_46375 »

listen for hissing noises aka vaccum leaks also check your oil cap seal and your make sure your intake hose from ail sensor to the intake has no leaks or holes
Quazi5
Regular Member
Posts: 56
Joined: June 17th, 2001, 2:01 am
Location: Beaufort, SC USA

Re: what should the RPM be at while car in "P"

Post by Quazi5 »

I agree with spawns post in referance to the hoses. My baby was idling low with a noticeable hissing sound coming from the front right. It was a couple of vaccume hoses that had come loose. Normal Idle when cold should be anywhere fom 900 to 1200 RPMs and when warm should be 600 to 900. Also make sure that you have regular maintenance done too. Hope I could help and good luck! :D
Blake Gibson<BR>'93 Black MX-3 GS<BR>Anyday is a good day if I'm in my MX-3.
Post Reply

Return to “V6 Technical/Performance”