amp with power, but no sound

david103 · Post by **david103** » November 2nd, 2002, 2:32 am

hey i have a Lanzar vibe 600 watt amp that i used to use. problem is, it stopped working for some reason, the wiring was ok, and the amp was still getting power. i can't see anything wrong with it... whats up with it? and, do any of yous guys wanna buy it? cheap. iv'e replaced it since, so its just taking up space...<P>dave

monty73741 · Post by **monty73741** » November 2nd, 2002, 2:54 am

hook up the joint & stick a multimeter on the speaker terminals to see if you are getting any out put<P>jason

BumpNGlow · Post by **BumpNGlow** » November 2nd, 2002, 6:27 pm

seeing as how you said it doesn't produce sound, I don't see why ppl will want to buy it... <P>and seeing as how its out of the car, I don't kow what we can do to help you w/ it. But I would look at the RCAs first.

mzdspd · Post by **mzdspd** » November 3rd, 2002, 10:20 pm

ill give u 5 bucks for it

david103 · Post by **david103** » November 4th, 2002, 2:05 am

i thought maybe this was a problem someone else might have encountered already, just looking for a quick fix. but oh well. <P>dave

mzdspd · Post by **mzdspd** » November 5th, 2002, 9:50 pm

what about my offer lol

mzdspd · Post by **mzdspd** » November 5th, 2002, 9:52 pm

just remembered this take the cover of the amp off and see if it has an internal fuse. these fuses are there to keep the amp from getting to low of an ohm load. just see if it is blown. some amps don't have this fuse. also why u are inside make sure all connections are good and make sure no caps or resistors or transistor are melted or damaged

MX-3.com

amp with power, but no sound

amp with power, but no sound

Re: amp with power, but no sound

Re: amp with power, but no sound

Re: amp with power, but no sound

Re: amp with power, but no sound

Re: amp with power, but no sound

Re: amp with power, but no sound