MX-3.com

Looking to buy some lightly used struts, and also the Vac solenoids on the back of the IM, below the VRIS on a DE...Lemme know pls!

FIXED AND RUNNING!!! Replaced entire wiring harness...which wasnt too bad, except broke a few vac lines off in back, still runs, bit choppy, but works for now...

HUGE thanks to Barry Clark! Thank you for the semi-walkthrough, and thanks to ALL the other posts and help!

LOVE you guys!

Ok, I've replaced the end two plus about 2 feet back of the disty plugs...just in case it was a broken wire in there... Still nothing. Also, i had a question, on the crank position sensor, if I were to unplug it, and check for power, should there be power coming FROM the plug, or going TO it FROM th...

bump, still needing

I need a V6 Crank Position Sensor...From the 1.8L or 2.5L V6 Mazda Motor. From the crank up to the connector. PLEASE LET ME KNOW!!! I need my car back

Thanks

Ok, went outside today and bolted down that loose wire with the grounds on it, still nothing, I've checked the fuses in the boxes under the hood by the battery, and also under the dash, are there fuses somewhere else or is that all? I cannot think of what else it could be, I've been without a car fo...

Ok, max kl, I went outside and checked, the one on the back of the IM IS hooked up/bolted down, although, the one that comes from the harness and is connected to the bracket by the disty itself is also bolted to the bracket, BUT the bracket is not bolted down to the motor itself...So, tomorrow when ...

OK, I have a 1993 Mazda MX-3 SE 5 spd. I was driving the car down the road with my girlfriend with me...(important fact...makes story better lol) and the "charge" light came on... Now...my car was leaking oil due to lowering springs and continous bottoming out...So...the alternator as well...

Like the topic says, I need to sell this turbo now and put my 92 GS DET on hold because my 93 SE finally blew...:( 300k on a K8 usually means death haha...but Im looking for the best offer right now, I bought this about a year ago from these forums, and It hasn't been installed while in my possessio...

Need the plastic piece around the HVAC above the ash tray, INCLUDING the cig lighter...PLEASE let me know!!

Just wanted to let anyone interested in buying parts from this mx3er, he's good for his word, I bought the rear calipers and gauge cluster from him, and I received my parts in a timely fashion...thanks wag..

bump, still need em!!!

I need both sides rear brake calipers, so..obviously if you only have one, i'll buy it..I need them for my SE!!! Shoot me a price!

I have to hold my key in the crank position for like....8-20 seconds sometimes to get my car to start...Im not really sure what would cause it, once it starts, it won't idle, i thought maybe the idle was too low, would that cause it not starting right away? any help is appreciated

I need ZE cams, i also need the heads too, if I can buy just cams, or just heads, that's fine too...anyone who has some just let me know..!