MX-3.com

Ok right i found a wiring diagram for the GTR on CP but the wiring colours in the connector don't match up with what i have. The connector is the same put just not the colours of the wiring or the locations. I also need to find a mazda wiring diagram for a 93 MX3 SOHC 1.6L so i can figure out which ...

The GTR white connector will not plug in as its too big. Like i said the GTR connector is a 15 pin and the MX3 is a 10 pin

I'm in the process of doing a GTR BPT engine swap in my 1993 SOHC MX3. I removed the stock ecu and engine harness and when i went to install the GTR harness i noticed one of the connector was different. Located down by the ECU, there is a black and white connector. On the MX3 the white connector is ...

Hey i'm looking for an intercooler and piping for my MX3 in the process of doing a BPT GTR swap. Let me know what you have

rustybarnard440@hotmail.com" onclick="window.open(this.href);return false;

What is the VAF your talking about?

There's No ford escort GT in the wrecking yard around me. Thats why i asked if the V6 mazda intermediate shaft and mount will work with my 92 protege G series trany. Yes its the FWD trany. The distributor is in the BPT GTR engine will i be ok to use that one? I never got the harness. I have a GTX EC...

I need axles and half shaft for my G series trany from a 92 Protege. Will the axles and half shaft work out of the V6 MX3?

Can i use my SOHC 1.6L distributor or the DOHC GTR 1.8L distributor?

Could you guys give me some help with this swap. List of things i need to do the GTR BPT 1.8L engine into my 93 MX3 1.6L SOHC. Finally got my GTR engine after waiting over two years for Corksport to get me one. I got a G series transmission out of a 92 protege that had the DOHC engine. This is what ...

Do you meet up every Friday and Saturday night? I'm in Fort Mac and would like to meet up with you guys. When ever i'm down in E town again. Show off my MX3 and check out others. Let me know

Yes i mean the day time running lights. So is the relay in the fuse box under the hood by the battery, or is it the alumium finned box by the battery i disconnect?

Can someone tell me how to disconnect my driving lights? I still want to be able to turn my regular lights on. Just need to Disconnect my driving lights.

Wow thanks for the help, that worked perfect. Definetly the cheapest and easiest route to fixing the problem. How in the heck did you ever figure that out.

So i tryed switching the resistor that we talked about above and it made not difference. The stock resistor was a 51ohm, i tryed a 27ohm, 10ohm, 1.5ohm resistor and they all flash at the same speed. So I need help to disable the load sensing circuit in my flasher so it will flash at a normal speed. ...

Thats not the problem its cause i have installed all LED bulbs for my signal lights which draws much less current