I can't remember off the top of my head the two head codes on the engine. when you listed one of them, I did.
I think the the other was 101 instead of 1A1, but can't be bothered walking outside to double check
with those pics and numbers, that was definately a klze.
250 is probably mean 2.5 litre ? It was on the inlet manifold AND the timing belt cover. If your not sure, look at a few others kl series engines first to compare :D those numbers you listed on the head, yes that is a straight neck klze. same as mine. they are different numbers on each head, but you...
where abouts are you ? that engine looks pretty good and clean to me. you seem to know what you're looking for. which ever klze you buy, you're not going to know how it's been transported, if it runs well, if the owner in japan gave it lots of stick, how long it's been sitting. etc etc it looks like...
I have that battery :D I didn't relocate it to the rear.. I'm in australia & am putting the straight neck ze in with this battery next to it.. done all the measurements, should fit .. It's only 78mm thick, or just over 3 inches :shock: Had it in for about a month, no problems, ze will hopefully ...
kl-01 cams come in sooner at a lower rpm range i am very sure on this YES !!!! the curve neck is off the eunos 800 and were all auto.. the reason the peak power band came in earlier is because the car was significantly heavier than the other cars that had the straight neck and to pull the extra wei...
I think the klze is quite happy to be revved to 7000rpm.. my buddys' is :D with the 4.39 tranny I believe in 2nd gear you would be doing about 90-95 km/h. ( about 55 mph ) at 7000 rpm.. with the 4.11 tranny at 7000 rpm in 2nd gear you would be doing about 100- 105 km/h ( about 60 - 63 mph ) So with ...
I got a question guys, have any of you guys cut out this sheet metal as pictured, behind where the fog light would be to help the ventilation ? just like this: http://corksport.com/content/00/01/06/61/73/uploaded.files/projsn9.html over here in Australia we have fog lights so just wondering if you g...
KL28...
It's the AU spec...
should be the the 1 that was running a klde in a probe, mx6, 626 AU spec etc, etc,,,,
that's what my buddy has sitting at his place, next to his klde he pulled both from his AU spec 626..