MX-3.com

ok so i found out that i gotta klde not klze so i have been readen the fourms about my ecu options so i hear i can use a mx6 ecu but my fans will stay on all the time. but if i chip my k8 ecu for a de will i have that problem


cts my gs ha two green and balck but the de dosnt have one how do i fix that?

You'll have to drill and tap the DE. Just use a vaccum while your drilling to ensure no metal is left in the coolant line.

i my have to take my IM off could i swap the neccks????

You have a '92 so the coolant sensor thing isn't an issue, just use a '93 probe/mx6/626 ECU aand VAF and you'll be perfect.

EDIT: Whoops didn't read that your motor only has one coolant sensor. In that case pick up a '94 KLDE ECU and find which plug is connected to the ECU (most likely the green one). The problems people have are when their harness only has 1 plug and they have to use an ECU that needs both sensors.

thank you mad cow thats what i wonted to hear