Page 1 of 1
pheno spacers
Posted: June 15th, 2009, 1:22 pm
by 96mx-3
just a quick question i bought a set of spacers, but i have a de and there for a ze/// will this cause restriction at all when using the gaskets ?
Re: pheno spacers
Posted: June 15th, 2009, 2:51 pm
by WhiteFinish
Quick answer : yes
Re: pheno spacers
Posted: June 15th, 2009, 8:51 pm
by mitmaks
just port match them
Re: pheno spacers
Posted: June 15th, 2009, 11:19 pm
by Nd4SpdSe
He would be using ZE spacers on a DE, so no there would be no restriction since the square runners are larger than the rounded ones. You could port match the heads, but the IM would still be the round runners. The only thing with those spacers is that they probably block the EGR hole on the IM.
Re: pheno spacers
Posted: June 15th, 2009, 11:43 pm
by fowljesse
They would just cause minor tubulance, which may help the "swirl" when the gas and air mix. I would check to see if the DE oval ports are wider than the sqare ZE spacers, but I think they're the same.
Re: pheno spacers
Posted: June 16th, 2009, 6:49 am
by muttpower
Just use your ze spacers as a stencil, and port your intake runners to match them...takes less than 1 hour....