Page 1 of 1
Replacing passenger side window hard?
Posted: March 26th, 2007, 2:02 pm
by Juans_93_MX3
I need to replace my passenger side window and I have a spare door. Has anyone done this? How hard is it to do?
Posted: March 26th, 2007, 9:28 pm
by Typhoonk
not very.
check the online manual for a decent walk-though
Posted: March 26th, 2007, 9:35 pm
by mitmaks
pretty easy, took me about 1/2 hr 2 years ago when someone busted mine
Posted: March 27th, 2007, 1:02 am
by Juans_93_MX3
Any advice on doing it because I dont want to pay some guy $80 to do it for me
What tools will I need? How do I do it?
btw, online manual dont show anything
window and tools...
Posted: March 28th, 2007, 7:35 am
by wvurubberducky
for mine all i used was a phillips head screw driver ( the 4 sided one) and rolled the track down to where i could see the two screws holding the window on. Unsrew those and clean all the glass out, slide the window into the door-make sure it is one track- line the two screw slots on the window and tighten the bolts in and that should be all there is to it. Mine are power and thats how it ws done, very easy.
Posted: March 28th, 2007, 8:20 am
by solo_ryder
It is not hard at all man, not sure why you would post about this, take the door cover off and you will see.
Posted: March 29th, 2007, 12:27 am
by Juans_93_MX3
Ok you guys are right. I found out the hard way. On my old damaged door with the good window, I just started to cut the the thing that holds the door cover. I cut about half of it off until I realized what I had to do. Really easy, dont know why they would want to charge me $80 for that.... a--holes they wont get a cent from me